12V 3.6A Battery 5-Stage Car and Motorcycle Battery Charger NPTERBL

General description This 12V 3.6A Battery Charger is designed for both car and motorcycle batteries, featuring a microprocessor control for enhanced performance. It offers a fully automatic 5-stage charging process that protects your battery from overcharging, allowing you to leave it connected indefinitely. This charger is suitable for various battery types, including calcium, gel, AGM, and wet batteries, and can help restore drained and sulfated batteries. Technical specifications Input Voltage: 100-240V AC, 50-60Hz Rated Output: 12V DC, 0.8A/3.6A Minimum Start Voltage: 8.0V Charging stages: 5 (Desulfation, Bulk, Absorption, Float, Stop) Thermal protection: 65°C +/- 5°C Efficiency: approximately 85% Dimensions (L × W × H): 170 × 65 × 40 mm Weight: 450g Installation AC cable length: 1.5m DC cable length: 1.4m Usage Desulfation: Breaks down sulfation in batteries left flat for long periods. Bulk: Charges the battery at maximum rate until approximately 60% charge. Absorption: Slows charging to allow the battery to reach 80% charge. Float: Maintains the battery at 100% without overcharging. Stop: The charger ceases charging and cuts off output. Other information Switch Mode Technology: Yes Polarity Protection: Yes Output Short Protection: Yes Non-Battery Link Protection: Yes Over Voltage Protection: Yes Over Temperature Protection: Yes Cooling: Natural Convection Reverse connection protection: Yes Output short circuit protection: Yes Beautiful box for packaging.