12V 30A Car Battery Excessive Discharge Anti Over Discharge Protection Module

1、Simple and practical battery discharge protection board

2、Using variable resistor

3、Green LED lights on when working, lights off when disconnected

4、Discharging protection for a variety of 12V accumulato

5、Disconnected automatically, re-connect manually

Features:

1, Simple and practical battery discharge protection board.

2, Using variable resistor.

3, Green LED lights on when working, lights off when disconnected.

4,Discharging protection for a variety of 12V accumulato

5,Disconnected automatically, re-connect manually

Specifications:

Protection Voltage:

Adjustable, potentiometer counterclockwise is low, clockwise is high.

Factory Value: 12 V

System: 10 V

PCB Size: 35 x 45 mm

Used

for: Discharging protection for a variety of 12 V accumulator. Designed

for 12 accumulator, but it will auto cut output load when the voltage of

accumulator is lower than 10 V. (It self will consume about 80 mA)

Package includes:

1 x Protection Module

Note:

1, Inductive load(e.g. motors) can not be used. 30 A is the load current

that relay contact allow, it is not current of accumulator.

2, After

load is disconnected automatically, when the battery voltage is back to

setting value, it cannot re-connect automatically but manually.

3, Please allow 1-3 mm error due to manual measurement. Thanks for your understanding.

4, Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.