12V 4-channel DC controller + 4-button remote control switch, 433MHz 1527 chip with 2 remote controls AK-RK04S-II + AK-FS04A 2 V3.0

Features:

x Very easy to use, simple wiring diagram connection.

x Supports remote control of up to 16 devices. It can connect electronic control locks, intercom doorbells, garage doors, light barriers, electrical devices, household appliances, motor controls, etc.

The door, turn off the light, open or close the curtain, etc.

x The four remote control buttons can each copy four different types of chips, meaning one remote can operate four different types of installations.

x The operating mode can be changed by you: you can switch between momentary, toggle, and lock modes as needed.

x Pairing Code Learning: it can work with a remote control on the same frequency, so you don't have to worry about losing remote control. (If the remote control is lost, buy one or two with the card im OKm.)

Specifications:

Recipient:

Channels: 4

Input Power: DC12V

Standby Current: 6mA

Output Current: 10A

RF Frequency: 433MHz

Output Power: DC / AC optional

RF Operating Mode: Superheterodyne Reception

Coded System: Learning Code (1527 chip); Fixed code

Receiving sensitivity: -105dBm

Decoding mode: MCU software decoding

Remote control storage: up to 16 PCS

Operating mode: Momentary, toggle, remote switches

Connection type: Fixed terminal

Output terminal: NO, NC, COM

Receiver board size: approx. 7.5 x 5.4 x 2.1 cm / (3 x 2.1 x 0.83 in)

Fuse box size: approx. 7.5 x 5.4 x 2.7 cm / (3 x 2.1 x 1.1 in)

Remote Control:

Frequency: 433MHz

Range: 50 m (open space)

Battery: 2 x CR2016 3V (included)

Operating Current: 10mA

Shock Resistance: 270K / 330K

Quantity: 1 piece

Remote Control Size (each): 5.8 x 3.2 x 1.2 cm

Information Kit:

Package Size: Approx. 17 x 11 x 5 cm / 6.7 x 4.3 x 2 in

Package Weight: Approx. 117g / 4.1 oz

Package List:

1 x Receiver Board

1 x Fuse Box

2 x Remote Control