12V 50A Waterproof Push Button Momentary Start Switch for Cars, Trucks, Tractors, RVs, Boat Track Horn Engine Starter (1 PCS)

【Dimension】JK260 Push-button switch height (without cover): 61.5 mm / 2.42 inches; Width 27.8 mm / 1.09 inches; Screw diameter 15.5 mm / 0.61 inches; Rated voltage and current: 12V 50A; Number of pins: 2; Waterproof cover 25.5 mm / 1.00 inches; Height 37.5 mm / 1.47 inches; Fixed plate length 65 mm / 2.55 inches; Height 2 mm / 0.07 inches; RV wire 30 mm / 1.8 inches; Copper core diameter 1.78 mm / 0.07 inches.

[Material] The push-button switch The JK260 uses copper or a copper alloy, which has excellent electrical and thermal conductivity, helping to transfer heat quickly and maintain stable equipment operation. Copper has strong resistance to oxidative environments and is difficult to oxidize from air and water. [Fast Trigger] The JK260 Push Button Switch adopts a momentary, normally open, 2-pin SPST design. When the switch is not pressed, the contacts are disconnected; when pressed, the contacts close and the circuit is turned on; after release, the contacts are open. When disconnected again, the circuit returns to the disconnected state.

[Weather Resistant Capability] The button cover is made of chloroprene rubber, which has excellent water and oil resistance, effectively preventing moisture and dust from entering the switch, protecting the switch's electrical components from damage and ensuring safe operation of the switch in harsh environments.

【Wide application】 The JK260 push-button switch can be widely applied as a horn or ignition switch for most cars, trucks, tractors, RVs, auto engines, marine engines, lawnmowers, motorcycles, boats, golf carts, ATVs, UTVs, jeeps, lawn tractors, engine starters, etc.【Square wire national standard 2.5】 RV wires use copper conductors and polyvinyl chloride insulation layers, which ensure electrical conductivity and wire flexibility, and provide good electrical insulation and resistance to aging.【Packaging】1PCS Black JK260 Push Button Switch, black cover, fixed plate, wiring kit includes (red PV wire x 1, black PV wire x 1, black sleeve x 1, tabs x 4).