12V battery circuit breaker – Remote switch with remote control – 200A for car and boat – Easy installation – DC12V

Application: new high quality remote battery connection switch, this remote electromagnetic battery switch allows you to place the cover under the hood towards your hand. Remote stop switch 12V, operating voltage range 11-15V, suitable for most cars, minivans, agricultural vehicles, etc.

LOW POWER CONSUMPTION: The switch consumes 5m while it is standby and about 3W when it is working, which is more energy efficient than a new car. The external antenna makes the signal farther and stronger. Only the battery is on/dyed, it cannot start your engine.

HIGH-QUALITY MATERIAL:The power-off switch is made of ABS, copper and silver, with high hardness, shock resistance, durability and difficulty in shaping and breaking. Anti-aging for maximum durability. High-quality products provide you with quality assurance and a longer service life.

Easy installation: remote car battery connection system, connect your car's power system with remote control, control distance 48.78m. Easy to install, not easy to fall, just a few steps to complete the installation. Practical and economical to fully meet your needs.

Easy installation: remote car battery connection system, connect your car's power system with remote control, control distance 48.78m. Easy to install, not easy to fall, just a few steps to complete the installation. Practical and economical to fully meet your needs.

Car Remote Battery Connection SwitchAutoOnOffKillSwitchMain Circuit Breaker Switch System

Installation method:
1:The red wire is connected to the positive pole of the battery and the black wire is connected to the negative pole of the battery. This is the power supply to the switch and the remote control switch consumes very little power. 2: The two large terminals of the relay switch constitute the main switch. One incoming line and one outgoing line, in no particular order, act as the on-off switch. 3: When controlling the negative plug, one large terminal is connected to the negative battery, and one large terminal is connected to the negative battery (the positive pole is also the equation).

Specification:
Item Type:Remote Battery Connection Switch Material:ABS,copper,silver Battery Model:CR2016x1 Battery capacity: 75 mAh Operating voltage: DC11-15V Rated Current:120A-200A Starting Current: 200A-360A(less than ten seconds) Standby current: 0.005 A Switch Size: Approx. 45x45x45mm/1.77x1.77x1.77in

Listofpackages:
2 remote controls 1xmain power switch 1xcopper terminal 2xBattery Clip 1xcopper adapter

Note:
After installation, when the relay switch is activated, the battery power consumption will be increased. When you leave the car, the main power must be cut off with the time control, in order to avoid power loss due to excessive power consumption and failure to start.