12V Battery Cut-Off Switch, DC12V 200A Remote Control Battery Cut-Off Switch, with Remote Control, Battery Cut-Off Switch for Car/Boat, Battery Disconnect Switch

General Description Discover our new remote battery disconnect switch, a high-quality electromagnetic device that allows you to easily control your car's power supply. This switch is designed to operate with a 12V voltage and is suitable for most cars, vans, and agricultural vehicles. Technical Specifications Item Type: Remote Battery Disconnect Switch Material: ABS, Copper, Silver Battery Model: CR2016 x 1 Battery Capacity: 75 mAh Operating Voltage: DC11-15V Rated Current: 120A-200A Starting Current: 200A-360A (less than ten seconds) Standby Current: 0.005A Switch Size: Approx. 45 x 45 x 45 mm Compatibility and Accessories Compatible with most cars, vans, and agricultural vehicles Includes: 2 remote controls, 1 main power switch, 1 copper terminal, 2 battery clips, 1 copper adapter Installation This battery disconnect system is easy to install. Follow these steps: Connect the red wire to the positive terminal of the battery and the black wire to the negative terminal. The two large terminals on the relay switch form the main switch (one input line and one output line). For the start control, connect one large terminal to the negative terminal of the battery. Operation Once installed, this switch allows you to remotely disconnect your vehicle's power supply from up to 48.78 meters away. It consumes little power (5 mA standby) and is easy to use. Note that only the battery circuit is controlled; it cannot start the engine. Other information After installation, when the switch is activated, battery power consumption increases. It is advisable to disconnect the main power supply using the remote control when leaving the car to avoid excessive power loss.