12V Battery Disconnect Switch – Remote Control up to 48m – Low Power Consumption 5mA – Anti-Theft System for Cars – DC12V

Application: New high-quality remote battery disconnect switch. This electromagnetic remote battery switch allows you to move the trigger under the hood to your hand. 12V remote kill switch, operating voltage range 11-15V, suitable for most cars, minivans, agricultural vehicles, etc.

LOW POWER CONSUMPTION: The switch consumes 5mA in standby and approximately 3W when in operation, making it more energy-efficient than a new car. The external antenna makes the signal travel further and stronger. Only the battery is turned on/off; it cannot start your engine.

Easy Installation: Remote car battery disconnect system; disables your car's power system with a remote control, control distance of 48.78m.

Easy to install, not easy to fall off, just a few steps to complete the installation. Practical and economical to fully meet your needs.

Remote Car Battery Disconnect Switch, Auto On Off Kill Switch, Main Switch System, Circuit Breaker

Installation Method:

1: The red wire is connected to the positive terminal of the battery and the black wire is connected to the negative terminal of the battery. This is the power supply for the switch, and the remote control switch consumes very little power.

2: The two large terminals of the relay switch constitute the main switch. An incoming line and an outgoing line, in no particular order, act as the on/off switch. 3: When controlling the negative terminal activation, one large terminal is connected to the negative terminal of the battery, and the other large terminal is connected to the negative terminal of the battery (the positive terminal is also the same). Note: After installation, when the relay switch is activated, the battery's power consumption will increase. When leaving the vehicle, the main power supply must be switched off with the remote control in time to avoid power loss due to excessive power consumption and starting problems.