12V DC 100W Water Pump – 160 Psi Pressure – 8 L/min Flow Rate – 70 Meter Head – Self-Priming for Clean Liquids – 160 Psi

General Description

This 12V DC 100W self-priming water pump is designed for efficient flow transfer. It offers a maximum pressure of 160 Psi (11 kg.f/cm²) and is ideal for various applications, such as car washes, solar-powered water systems, and remote-controlled equipment. Thanks to its easy connection system and low energy consumption, this pump is both powerful and economical. Technical Specifications: Maximum Power: 100 W; Working Pressure: 0.7 MPa / 101.5 psi (145 psi = 1 MPa); Maximum Flow Rate: 8 L/min; Head: 70 meters; Range: 9 meters; Suction Distance: 1.5 meters; Dimensions (L x W x H): 18.3 x 4.7 x 4.8 cm (7.2" x 1.85" x 1.89")

Outer diameter of the interface: approximately 18 mm / 0.71"

Inner diameter of the interface: approximately 7.5 mm / 0.30"

Suitable inlet/outlet pipe size: 12 mm outer diameter, 8 mm inner diameter

Weight: approximately 1.18 kg

Installation

Easy to install, but professional installation is highly recommended. The water inlet end must use filters.

The power supply must be a complete assembly.

Operation

The pump starts automatically when the water outlet is opened and stops when the outlet is completely blocked.

Equipped with an integrated pressure switch, it automatically shuts off when pressure builds up and restarts when the tap is reopened.

Suitable only for pumping clean liquids free of impurities.

Other information

The pump must be used with a suitable spray nozzle to avoid damaging the pressure switch. The product may be sent randomly as a new or old type.

Package list: 1 x self-priming water pump.