12V DC 4-channel controller + 4-key 433Mhz remote control switch 1527 chip with 2 remote controls AK-RK04S-II + AK-FS04A 2 V3.0

Features:

x Very easy to use, with a simple wiring diagram connection method.

x Supports remote control of up to 16 pieces. It can connect to electric control locks, intercom doorbells, garage doors, barrier-free doors, electrical appliances, household appliances, motor control, door openers, close the light, open or close the curtain, etc.

x The four remote control buttons can respectively copy four different types of chips, meaning one remote can operate four different types of facilities.

x The operating mode can be changed by yourself: you can switch momentary, toggle, and latch modes as you need.

x Learning Code pair: it can work with any remote control with the same frequency, so you don't have to worry about losing the remote control anymore. (If the remote control is lost, buying one and pairing it with the board is OK).

Characteristics:

Recipient:

Channels: 4

Input power: DC12V

Standby current: 6mA

Output current: 10A

RF frequency: 433MHz

Output power: DC / AC optional

RF operating mode: superheterodyne reception

Coded system: Learning code (1527 chip); fixed code

Reception sensitivity: -105dBm

Decoding mode: MCU software decoding

Remote control storage: up to 16 PCS

Operating mode: Momentary, toggle, latching

Connection type: fixed terminal

Output terminal: NO, NC, COM

Receiver Board Size: approx. 7.5 x 5.4 x 2.1cm / (3 x 2.1 x 0.83)

Fuse Box Size: approx. 7.5 x 5.4 x 2.7cm / (3 x 2.1 x 1.1)

Remote control:

Frequency: 433MHz

Range: 50 m (open space)

Battery: 2 x CR2016 3V (included)

Working actuator: 10mA

Impact resistance: 270K / 330K

Quantity: 1 piece

Remote control size (each): 5.8 x 3.2 x 1.2cm

Information Kit:

Package size: approx. 17 x 11 x 5cm / 6.7 x 4.3 x 2in

Package weight: approx. 117g / 4.1 oz

Package list:

1 x Receiver Board

1 x Fuse Box

2 x Remote Control