12V DC 60W Self-Priming Water Pump – Flow Rate 5L/min – Pressure 116Psi – Suction Height 1.5m – For Cleaning and Solar Systems

General Description

This high-quality DC micro-diaphragm pump features a pressure switch for automatic operation. It shuts off when the water outlet pressure reaches a sufficient level and restarts when the pressure drops.

It is recommended not to run the pump dry for extended periods. This model is ideal for applications requiring energy savings and frequent switching, such as washing machines, solar water systems, and automatic water control.

Technical Specifications

Voltage: DC12V

Power: 60W

Flow Rate: 5L/min

Maximum Operating Pressure: 116psi (0.8MPa)

Suction Head: 1.5 meters Pump Lift: 50 meters

Size: approx. 9.9 x 16.7 cm

Line length: approx. 29 cm

Outer diameter of interface: approx. 10.8 mm

Inner diameter of interface: approx. 6 mm

Package weight: 688 g

Application: Used in industry, agriculture, vehicle modification, cleaning, and water treatment.

Compatibility and accessories

The water inlet and outlet interface easily connects to PE or PU silicone hoses.

Package includes: 1 x self-priming pump.

Installation

The direction with a small arrow on the pump indicates the water outlet.

The wires are not divided into positive and negative terminals.

The pump can be placed in any direction.

Operation

Do not run the pump dry. The cut-off pressure is factory-set and should not be adjusted without caution.

Avoid pumping impurities to prevent blockages. Use a short inlet hose, no longer than 1.5 meters.

Do not pump strong acidic or alkaline liquids.

Other Information

If the pump will not be used for an extended period, add a few drops of water to the pump port to restore suction. Check the wire connections if the pump does not operate.