12V High Pressure Micro Diaphragm Pump, 11.3L/min, for Cleaning, Self-Priming (F42101055101)

Features:1.When the motor overheats, the pump automatically stops and restarts automatically when the temperature drops to a safe level.
2.Comes with a quick interface, simple operation, and quick and convenient installation.
3.Equipped with anti-vibration iron plate mounting feet, which can significantly reduce operating noise.
4.The iron plate surface is galvanized for rust resistance, making it resistant to rust and corrosion in humid environments. It also has strong antioxidant capacity and is durable.
5.Suitable for car washing, filling machines, garden agricultural spraying, agricultural spraying, water heaters, domestic water pressurization, RVs, yachts, shower pressurization, green mist spraying
Specifications:Item Type: Micro-diaphragm Pump
Product Material: Engineering Plastic
Solid Impurities Volume: ≤0.1
Particles: No more than 0.2 mm
Ambient Temperature: ≤50 ℃
Medium Temperature: 0 -65 ℃
pH Range: 5.0-10
Flow Rate: 11.3 L/min
Head: approx. 38 meters / 124.7 feet
Suction head: approx.3.0 meters / 9.8 feet
Gallon: 3.0 GPM
Use scenarios: car wash, filling machine, garden agricultural spraying, agricultural spraying, water heater, domestic water booster, RV, yacht, shower booster, green mist spray
Note:
1.When the water pump is running, it is necessary to ensure a smooth drainage of the water pump to prevent seizing and damage to the pressure switch.
2.If you hear an unusual noise from the switch during operation, please turn off the pump immediately and increase the pressure accordingly.
3.The motor has a slight waterproofing function.There is no need to worry too much about splashes of a little water (you can wipe it off), but it is strictly forbidden to immerse the pump motor in water.If the pump is placed outdoors, it must be covered to protect it from water splashing onto the motor.Causing a power outage, leakage, or damage to the motor.
4.The water inlet must be installed with a filtering device, and liquids containing impurities cannot be sucked out, otherwise it will easily block the water pump, resulting in pressure drop and flow reduction, or even water cannot be pumped. .
5. It is strictly forbidden to use this machine without the filter connected, and the filter density is preferably above 80 grains (impurities will damage the pump)
6. The pump operates intermittently and should not operate 24 hours a day
7. Please disconnect the connection between the motor pump and the power supply when it is not used for a long time or temporarily suspended.
8. The water pump has a pressure switch adjustment function. The pressure can be adjusted appropriately according to its actual needs, but it cannot be adjusted too small or too large.A switch that is too small will easily start and stop frequently and cause burns.If a switch is too large, it may not work.To operate, prevent the pump from stopping normally.
9.Please confirm the power supply before use; the power supply parameters must be consistent with the pump's input parameters.
10.To prevent water leakage to the rotor in case of product failure, the correct installation method is with the pump head facing downwards or placed flat.

Package List:1 x Micro-diaphragm Pump2 x Quick Installation Connectors1 x Filter1 x User Manual