12V Mite Spray Fog Machine, with Handle, Iron, Outdoor Electric Fume for Bee Elimination, 250W

Features:1. Temperature regulator: with temperature display, heating range from 50 to 400 degrees, manual button control, convenient and easy to use.
2. Push-rod switch: push forward and hold; the machine stops after a few seconds. The machine stops immediately upon releasing the push rod. Pull the push rod back; the timer does not function.
3. Operating instructions: The yellow button can turn the light on and off with a single press. A small battery above 12V 20A must be prepared and connected to the fog machine via the power cord for portable use.
4. Anti-slip: The base has a rubber foot pad design, so it can be placed on the desk, preventing it from easily tipping over and scratching the surface.
5.Portable Handle Design: This 12V fog machine has a portable handle, making it easy to carry outdoors and providing you with an excellent user experience.
Specifications:Item Type: Reaching Spray Fog Machine
Material: Iron
Weight: Approx.2514g / 88.7 oz
Product Size: Approx.24.5x11.8x12cm / 9.6x4.6x4.7in
Battery (shipped with built-in battery): Lithium battery, 1500mAh
Rated power supply: DC 12V 250W
Note: The delivery will include 3 fuses, which can only be activated after the customer has used them. USAGE: APPLICATION: Cleaning equipment
Heating electrode, worn pump head hoses
Cleaning function:
After using the entire area, wait until the machine cools to approximately 200 degrees Celsius. Remove the straw from the medicine jar and place it directly into the cleaning agent bottle before pushing the plunger for more than 15 seconds to complete the cleaning.(When the use of pure water cleaning temperature should be reduced to less than 100 degrees)
Spray method:
The first use is about 1 second or less, then slowly increase the dosage, the amount of medicine used in each hive is different, according to the potential of the bee colony to increase or decrease the number of seconds, the specific operation is as follows.
2. Nail eye spray: Nail eye spray into the eye of the eye to ensure that there is no propolis obstructing inside the nail eye, if it is a group of high boxes can be in the step box of the queen board nearly 2 cm drilling, the nail eye above on the side beam can not be on the bee road. The nail holes above should be on the side beams and not in the bee's path.(We suggest this method is less wasteful and more efficient)

How to use:Use the steps: Plug the power cord into the machine's socket, and connect the other end to the 12V battery, regardless of the positive and negative terminals. At this point, the voltage should be above 10V.Adjust the temperature control knob to approximately 360 degrees. The machine will heat up normally when the red indicator light illuminates. Observe the change in the digital temperature display. Wait for the machine to heat up (approximately 8-10 minutes the first time). Add the special mite essential oil to the medicine jar, following the instructions.When the green indicator light illuminates, the digital temperature display will rise to the required temperature. You can then begin spraying. Turn the timer to the right to select 3 seconds. After that, pull the push rod until the medicine tube is filled with essential oil, creating a large number of bubbles. Then push the rod 3 to 4 times to disperse the oil.After the fog is released, turn the timer to the left to 1 second to begin the bee colony trial. After 2 hours of observation, determine whether you need to add or subtract the production time based on the bee population at the site, then use the entire site.
Package List:3 x Fuse Wire
1 x Specification

1 x Attraction Spray Fog Machine

1 x Power Cord

Note: Customers must purchase special oil to kill mites (not included). Note: 1. The machine requires its own 12V battery (20A capacity or higher). The estimated spray capacity is 200 units. The power cord cannot be extended during use.2. If not used for an extended period, after spraying essential oil, do not pull the push rod until a large number of bubbles appear inside the pot, then continue for more than 10 seconds.3.Do not allow the machine to overheat when testing water. Do not use a similar diesel-type spray to avoid blockages in the pipeline and prevent internal damage to electronic components.4.Each time, ensure the suction tube filter in the pot is intact to avoid inhaling foreign matter that could block the heating element.5.If the timer runs out before the scheduled time, immediately release the push rod in the manual control to avoid spraying more bees and injuring them.