12V Wireless Winch Remote Control, 2 Pieces, Universal Electric Replacement for Jeep ATV Truck

Features:

1. Professionally manufactured, high precision, high reliability, universal replacement for Jeep ATV trucks.
2. Works with Tuff Stuff or Recon Recovery winches, as well as most Warn, Ramsey, Superwinch, Smittybilt, Gorilla, Bulldog, and many other brands of self-recovery winches.
3. Wireless remote operation allows you to operate the winch up to 60 feet (15.24 m) without cables or switches.
4. Operation is simple; you can start, stop, enter, or exit the winch by simply pressing the remote control transmitter button.
5. Made of high-quality ABS and metal, sturdy and durable, long service life.

Specifications:

Item Type: Wireless Winch Remote Control
Material: ABS + Metal
Battery Type: Lithium Battery (Built-in battery, comes with battery)
Battery Model: 6f229v
Battery Capacity: 200mAh
Specification:
Frequency: 434MHz (433.92MHz)
Voltage: 9-30V
Connection Voltage: DC 12V
Features:
Long range up to 50 feet/15.24 m
The transmitter has a long lifespan.
Battery and energy-saving circuitry.
Transmitter and receiver.
Visual indicator shows remote operation.
An additional transmitter that can be used to operate the receiver.
Installs in minutes.
Replacement transmitter battery available for use at any time.
Fitment:
Universal replacement for Jeep ATV truck

How to Use:

Wiring Instructions: 1. Red wire – positive (+) 2. White wire – OUT 3. Yellow wire – IN 4. Black wire – negative (-) 5. Blue wire – antenna The wireless remote control is designed for the self-recovery front winch only. The remote control is not designed or intended for use in industrial applications (carrier/utility vehicle transporter, tow truck, crane, etc.) or any other winch or crane remote control application. We recommend operating the winch as follows: 1. Loosen the winch clutch. 2. Pull approximately 1.5 m/1.64 yd of the winch wire rope out. 3. Re-engage the winch clutch. 4. Insert the remote control receiver plug into the female connector on the winch's electromagnetic control box. If your wireless remote control is type -03, you must properly connect the black ground wire to the negative terminal of the battery. 5. Place your receiver somewhere. 6. Keep the receiver antenna straight. 7. Remove the transmitter antenna and lower the transmitter cover to expose the control buttons. 8. Press the button to operate the winch to start, stop, enter, and exit. (It is highly recommended to find a professional to install it)

Package List:

2 x Remote Control
1 x Receiver
1 x Manual