13P diamond disc for cutting tiles, marble, concrete 112 mm

Diamond cutting disc for tiles, marble, stone and concrete

This diamond disc is designed for cutting common mineral materials on building sites or during renovation work. It is suitable for tiles, marble, stone, certain concrete elements as well as other masonry materials depending on the machine used. Thanks to its compact format and precision-focused design, it meets the needs of demanding DIY users as well as professionals looking for a reliable, clean and consistent cutting accessory.

This type of diamond circular blade is particularly suitable for operations that require a good quality finish, especially for cutting tiles, thin slabs, stone panels or for certain occasional wall channelling work with compatible equipment. Its compact size makes handling and storage easier, while maintaining good efficiency on hard materials.

Product strengths

• Versatile cutting disc for tiles, marble, stone and concrete
• Diamond technology suitable for hard and abrasive materials
• Clean and precise cut for finishing work
• Practical compact format for small building sites and targeted jobs
• Useful accessory for renovation, installation and interior fitting work

Areas of use

This cutting disc can be used in many DIY and construction situations. It is particularly useful for installing wall or floor tiles, adjusting marble pieces, cutting decorative stone, touch-up work on mineral elements and certain jobs on concrete. It fits well into a home renovation environment, bathroom, kitchen, terrace or technical area fitting projects.

For a user in France, this product meets frequent uses such as cutting earthenware tiles, porcelain stoneware depending on compatibility, small pieces of natural stone or masonry elements on domestic building sites. It may also be suitable for second-fix work where consistent cutting and controlled handling are important.

Product features

• Diamond circular disc intended for cutting construction materials
• Can be used on tiles, marble, stone and concrete depending on the machine and cutting conditions
• Precision-focused design for a cleaner cut
• Compact structure suited to localised work
• Cutting accessory for compatible portable power tools

Technical parameters

• Product name : Diamond cutting disc for tiles, marble, stone and concrete
• Product type : Diamond circular cutting blade
• Model : 13P
• Materials worked : tiles, marble, stone, concrete
• Colour : not specified
• Main material : diamond segment or surface with metal base
• Length : 11,20 cm
• Width : 11,20 cm
• Height / stated thickness : 0,19 cm
• Volume : 23,834 cm³
• Weight : 110 g
• Installation : fitting on a compatible machine according to the bore and the tool specifications
• Compatibility : to be checked with the saw, grinder or wall chaser used

Installation and use advice

Before fitting, it is recommended to check the disc diameter, the type of bore, the maximum permitted speed and compatibility with your machine. The disc must be installed on a tool in good condition, switched off, following the direction of rotation indicated by the manufacturer where applicable. Correct fastening helps limit vibrations and improve cutting quality.

To obtain good results, it is advisable to work with a steady feed, without excessive pressure. On fragile materials such as tiles or marble, progressive cutting helps reduce the risk of chipping. Wearing personal protective equipment is essential, especially goggles, suitable gloves and hearing protection. For very hard materials or intensive use, it is also important to follow the machine’s recommendations for cooling and rate of use.

Package contents

• 1 diamond cutting disc model 13P

This diamond saw disc is a practical solution for users looking for a compact, precise cutting accessory suitable for the most common mineral materials. Its versatile positioning makes it a relevant choice for installation, cutting and adjustment work in the building, renovation and interior fitting sector.