1/4" Air Pressure Regulator, Air Compressor Filter, Moisture Separator, Filters Moisture, Cleans and Dries Air, Protects Compressed Air Tools and Pneumatic Devices

General Description

The 1/4" air pressure regulator is an essential device for filtering moisture and fine particles, ensuring clean, dry air for your pneumatic tools. Its design maintains a constant output pressure, regardless of variations in inlet pressure and flow rate. It is ideal for use in various fields such as air compressors, pneumatic tools, and construction machinery.

Technical Specifications

• Air Inlet Size: 1/4 NPT
• Flow Rate: 500 L/min
• Maximum Working Pressure: 10.3 BAR (145 PSI)
• Operating Temperature Range: 5-60 ℃ (40-140 F)
• Body Material: Aluminum Alloy
• Drain Type: Manual
• Filter Element: Fiber with high filtration capacity
• Pressure Gauge: Accurate with psi/mpa scale

Installation

• Before installing the filter, clean the threaded ports and fittings to prevent any impurities from entering the system of air.
• Make sure to follow the direction of airflow indicated by the arrow on the filter.
• Wrap Teflon tape around the fittings to prevent air leaks.

Operation

• To adjust the pressure, pull the black knob on top and turn it to adjust to the required pressure.
• Check the pressure using the pressure gauge.
• To drain the water, manually push the drain needle upwards when air pressure is present.
• The transparent cup allows you to observe the water and oil levels, but should not exceed 80% of its capacity.