149-piece automatic drip irrigation kit, 30 m/100 ft, automatic watering system for greenhouse and garden

• 1. Multifunction: Our drip irrigation kit comes with two types of sprayers. Suitable for automatic plant watering, garden irrigation, greenhouse automatic watering, automatic watering and garden irrigation. It is an effective and economical solution for plants and crops.
• 2. Simple, no-dig, no-plumbing installation: Dip the end of the hose in hot water for one minute before attaching the fittings. Installation is easier and, once cooled, the pipe stays tight. You can cut the pipe to the desired size.
• 3. Connecting Drip Irrigation Components: Connect the 1/4 inch drip hose to the main water supply line. The other end is directly connected to a transmitter that distributes water to the plants.Irrigation pipes deliver water directly to plants and crops, reducing water waste and ensuring plants receive the amount of water they need to grow and thrive.Shrink-wrapped packaging is convenient.
• 4.Water Savings: The drip irrigation system saves up to 75% of water.The precision watering system slowly and accurately delivers the right amount of water where your plant needs it, at the root level.
• 5.Widely Used: The automatic watering kit is ideal for misting, irrigating lawns and patios, cooling roofs, agriculture, vegetables, greenhouses, flower beds, misting pools, and more.

Garden plant watering kit; garden irrigation system. This watering kit consists of a sprinkler and a condenser. Simply connect it to the tap to water your potted plants, vegetables, greenhouse plants, and flower beds in a variety of ways. Weight: 910 g.
Color: Black. Material: Rubber and plastic. Contents:
2 capillary tubes (4 mm, 15 m) for water transport. 1 three-way ball valve for hose separation. 2 pointed hose distributors with quick-connect fittings. 1 quick connector. 1 securing strap to prevent dripping from the tap. 30 condensers with red caps and adjustment. 20 orange nozzles with adjustable condenser. 30 positive tees for hose connection.
20 flat tees for hose connection. 30 fixed rods for hose connection. 2 capillary plugs to seal the end of the hose. 10 hose fittings. Note:
1. The amount of water in the condenser is affected by water pressure and other factors. Low water pressure reduces efficiency. It is recommended to use multiple hoses simultaneously. Each hose connects to a number of condenser heads, depending on the actual water pressure. 2. Before connecting the hose to the fittings, immerse the ends of the hose in hot water for one minute. This will facilitate connection and, once cooled, will stabilize the hose. 3. If possible, use a self-tapping screw, as the rubber hose may detach under high water pressure.