149-piece automatic drip irrigation kit, 30 m/100 ft, automatic watering system for greenhouses and gardens

• 1. Multifunctional: Our drip irrigation kit comes with two types of sprayers. Suitable for automatic plant watering, garden irrigation, automatic greenhouse watering, and general garden irrigation. It's an efficient and economical solution for plants and crops.
• 2. Simple Installation, No Digging or Plumbing Required: Soak the end of the hose in hot water for one minute before attaching the fittings.

• 3. Connecting the Drip Irrigation Components: Connect the 1/4-inch drip tubing to the main water supply line. The other end connects directly to a transmitter that delivers water to the plants. The irrigation tubing delivers water directly to plants and crops, reducing water waste and ensuring plants receive the amount of water they need to grow and thrive. Shrink-wrapped packaging is convenient.
• 4. Water Savings: The drip irrigation system saves up to 75% of water. The precision watering system slowly and accurately delivers the right amount of water where your plant needs it—at the roots.
• 5. Widely used: The automatic watering kit is ideal for misting, irrigating lawns and patios, cooling roofs, agriculture, vegetables, greenhouses, flower beds, misting pools, etc.

Garden plant watering kit; garden watering system. This watering kit consists of a sprinkler and a condenser. Simply connect it to the tap to water your potted plants, vegetables, greenhouse plants, and flower beds in multiple ways.

Weight: 910g.
Color: Black.

Material: Rubber and plastic.

Contents:
2 capillaries (4mm, 15m) for water delivery.

1 three-way ball valve for hose separation.

2 pointed hose distributors with quick-connect fittings.

1 quick connector.

1 securing strap to prevent dripping. tap.

30 condensers with red cap and adjustment.

20 orange nozzles with adjustable condenser.

30 positive tees for hose connection.
20 flat tees for hose connection.

30 fixed rods for hose connection.

2 capillary plugs for sealing the end of the hose.

10 hose fittings.

Note:
1. The amount of water in the condenser is affected by water pressure and other factors. Low water pressure reduces efficiency. It is recommended to use multiple hoses simultaneously. Each hose connects to a certain number of condenser heads, depending on the actual water pressure.

2. Before connecting the hose to the connectors, immerse the ends of the hose in hot water for one minute. This will make the connection easier. and, once cooled, will stabilize the hose.

3. If possible, use a self-tapping screw, as the rubber hose may detach under the high water pressure.