149pcs Automatic Drip Irrigation Kit, 30m, Automatic Watering System for Greenhouse and Garden

• 1. Multifunction: Our drip irrigation kit comes with two types of sprayers. Suitable for automatic plant watering, garden irrigation, greenhouse automatic watering, automatic watering and garden irrigation. It is an effective and economical solution for plants and crops.
• 2. Simple, no-dig, no-plumbing installation: Dip the end of the hose in hot water for one minute before attaching the fittings. Installation is easier and, once cooled, the pipe stays tight. You can cut the pipe to the desired size.
• 3. Connecting Drip Irrigation Components: Connect the 1/4-inch drip hose to the main water supply line. The other end is directly connected to a transmitter that distributes water to the plants.Irrigation pipes distribute water directly to plants and crops, reducing water waste and ensuring plants get the amount of water they need to grow and thrive. Shrink wrapping is convenient.
• 4. Water Savings: The drip irrigation system saves up to 75% of water. The precision watering system slowly and precisely delivers the right amount of water where your plant needs it, at the roots.
• 5. Widely Used: The automatic watering kit is ideal for atomizing, irrigating lawns, patios, roof cooling, agriculture, vegetables, greenhouses, flower beds, misting irrigation of swimming pools, etc.

Watering kit for garden plants; garden watering system. This watering kit consists of a sprinkler and a condenser. Simply plug it into the tap to water your potted plants, vegetables, greenhouse plants and flower beds in multiple ways.

Weight: 910 g.
Color: black.

Material: rubber and plastic.

Contents:
2 capillaries (4 mm, 15 m) for water transport.

1 three-way ball valve for pipe separation.

2 pointed hose dispensers with quick couplings.

1 quick connector.

1 fixing strap to prevent dripping from the faucet.

30 capacitors with red cap and adjustment.

20 orange nozzles with adjustable condenser.

30 positive tees for pipe fitting.
20 flat tees for pipe fitting.

30 fixed rods for pipe connection.

2 capillary plugs to block the end of the pipe.

10 pipe fittings.

Note:
1. The amount of condenser water is affected by water pressure and other factors. Low water pressure reduces efficiency. It is recommended to use multiple hoses simultaneously. Each pipe connects a certain number of condenser heads, depending on the actual water pressure.

2. Before connecting the hose to the connectors, immerse the ends of the hose in hot water for one minute. This will make the connection easier and, once cooled, stabilize the pipe.

3. If possible, use a tapping screw, as the rubber hose may come loose under the high water pressure.