14mm brass worm gear, 24 teeth, module 1.5 for motor gears and mechanical transmission

Welcome to our shop! Discover our 24-tooth brass pinion, designed for use with a stainless steel worm gear. This combination creates a compact, robust assembly with a high 24:1 reduction ratio and exceptional torque. This system is self-locking and allows for reverse locking: only the worm gear can drive the wheel, not the other way around. This means your motor doesn't need to maintain constant torque to support the load, thus optimizing energy efficiency. This pinion has a module of 1.5 and a center bore diameter of 14mm. It incorporates a standard mounting hole pattern for easy robotic compatibility. One face of the gear features a circular groove. This ingenious design significantly reduces weight without compromising the part's strength. It also prevents interference with the heads of the mounting screws, ensuring a perfectly flat mounting surface. If this groove proves problematic during assembly, simply flip the pinion. The other side of the brass pinion is perfectly flat. This dual configuration greatly facilitates installation and fastening, thus expanding the application possibilities of this gear. You will receive: 1 x Brass Pinion. **Detailed Specifications:*** Item Type: Brass Worm Gear * Material: Brass * Model: 4309-0014-0024 * Center Hole Diameter: Approx. 14mm / 0.6 inch * Number of Teeth: 24 * Module: 1.5 * Application: Motor Drive Gear