1/4
1.5-13mm Drill Chuck 1/2-20 UNF Quick Change Chuck for Electric Drill Conversion
Sold by re-green GmbH and 1 other seller
You may also like
Compare with similar items
Product information
Description
Material: The chuck is made of chrome vanadium steel (CR-V), which offers high hardness, wear resistance, durability, and a long service life after heat treatment. Capacity range: 1.5 - 13 mm / 0.06-0.5 inch, Threaded spindle/spindle holder: 1/2"-20UNF. Multiple accessories: 1/2"-20UNF threaded chuck equipped Includes a 1/2" square drive female adapter, a 1/4" hex shank, and an SDS shank to allow the converter to quickly connect various power tools. Widely applicable: The chuck is suitable for gyroscopic screwdrivers, cordless screwdrivers, impact drivers, impact wrenches, angle grinders, and other electric or pneumatic tools. Caution: The chuck must not be used counterclockwise! When using a hammer drill chuck, the hammer drill's gearing must be adjusted. Incorrect gearing will cause the chuck to break!
Features
- BrandAIPERQ
- Max clamp diameter13 mm
- Chuck diameter1.5 mm
- MaterialSteel
- Compatible drillStandard drill
- Weight500 g
- Chuck tighteningKeyless self-tightening
- ChuckHexagonal
- ManoMano ReferenceME91869018
- MMID104861750868
- Product codeXYTW-1279
- EAN6963579363300
Advice from
Drill buying guide
From hammer drills to drill drivers, your choice of drill will come down to the type of tasks you want to complete. For example, a cordless drill is better for driving screws while a corded drill is best suited to drilling. Read on for our tips on picking the right torque, RPM, impact rate, battery and chuck type.
'/%3E%3C/svg%3E)
You are here:
'/%3E%3C/svg%3E){kind=small}