15m High-Pressure Cleaner Hose Unclogging Kit – Swivel Nozzle and Karcher Adapter – 180 bar Pressure – Compatible with K2/K3/K4/K5/K6/K7

General Description

The pipe unclogging kit for high-pressure cleaners is designed for effective pipe cleaning. With a length of 15 meters, this kit includes a drain cleaning hose, a Karcher adapter, a nozzle, and a swivel nozzle, allowing you to easily dislodge blockages in pipes.

Technical Specifications

• Maximum operating pressure: 180 bar
• Maximum operating temperature: 60 °C
• Inlet: M22 IT (internal thread)
• Outlet: 1/8" AG (external thread)
• Hose inner diameter: 14 mm

Compatibility and Accessories

• Compatible with Karcher K2/K3/K4/K5/K6/K7 pressure washers
• Also works with other brands such as Kranzle, Robyi, Honda, etc.
• Package List: 1 tube of 15m drain cleaning hose, 1 Karcher M22 adapter, 1 nozzle, 1 swivel nozzle, 1 PTFE tape

Installation

To install the kit, simply lay the high-pressure hose flat, extend it before use, and then connect the connector to the corresponding high-pressure cleaning gun. Note that this hose should only be connected to a high-pressure cleaner, not directly to a tap.

Use

Use the nozzle with 3 rear nozzles at 33 degrees to clean and rinse debris from drain and sewer pipes. The swivel nozzle with 1 front nozzle at 0 degrees and 3 rear nozzles at 33 degrees allows you to clear blockages and clean effectively.

Other information

• The inner tube is made of thermoplastic polyester
• The reinforcement layer is made of high-strength polyester mesh resistance
• The top layer is made of thermoplastic polyurethane, offering resistance to weathering, oil, abrasion, and ozone.
• Note: Due to manual measurement, the size may have an error of 2 cm/1 inch.
• Colors and sizes may vary slightly depending on the monitor and angle.