15m hose unclogging kit for high-pressure cleaners – Swivel nozzle and M22 adapter – 180 bar pressure – Compatible with Kärcher K2/K7

General Description

The 15m hose unclogging kit is designed for Kärcher high-pressure cleaners.

It includes a high-pressure cleaning hose, a nozzle, a swivel nozzle, and an adapter.

Technical Specifications

Hose Length: 15 m

Maximum Operating Pressure: 180 bar

Maximum Operating Temperature: 60 °C

Inlet: M22 IT (internal thread)

Outlet: 1/8" AG (external thread)

Inner Diameter: 14 mm

End Fitting Thread: M22 x 1.5

Compatibility and Accessories

Compatible with Kärcher K2/K3/K4/K5/K6/K7 HDS pressure washers. Also works with other brands such as Kranzle, Robyi, Honda, etc.

Package Contents

: 1 x 15m drain cleaning hose. 1 x Karcher M22 adapter. 1 x nozzle. 1 x swivel nozzle. 1 x PTFE tape. Installation: Unfold the high-pressure hose and stretch it before use. Connect the fitting to the corresponding high-pressure cleaner gun. Use: Use the nozzle with three rear nozzles at a 33-degree angle to clean and rinse debris from drain pipes. The swivel nozzle with one front nozzle at a 0-degree angle is used to clear blockages. Other information: The inner tube is made of thermoplastic polyester. The reinforcement layer consists of a high-strength polyester mesh. The outer layer is made of thermoplastic polyurethane, providing resistance to weathering, oil, abrasion, and ozone. Note: Must only be connected to a pressure washer, not directly to a tap. Due to manual measurement, dimensions may have an error of 2 cm / 1 inch. Colors and sizes may vary slightly depending on monitors and angles.