15m hose unclogging kit for Kärcher high-pressure cleaners with nozzle and swivel nozzle, professional 180 bar drain auger kit with adapter for Karcher K2/K3/K4/K5/K6/K7 accessories, AA

General Description The 15m pipe unclogging kit is designed for Kärcher high-pressure cleaners. It includes a high-pressure cleaning hose, a nozzle, a swivel nozzle and an adapter, providing an effective solution for unclogging pipes and drains. Technical Specifications Hose Length: 15 m Maximum Operating Pressure: 180 bar Maximum Operating Temperature: 60 °C Inlet: M22 IT (internal thread) Outlet: 1/8" AG (external thread) Inner Diameter: 14 mm End Fitting Thread: M22 x 1.5 Compatibility and Accessories Compatible with Kärcher K2/K3/K4/K5/K6/K7 HDS pressure washers. Also works with other brands such as Kranzle, Robyi, Honda, etc. Package Contents: 1 x 15 m drain cleaning hose, 1 x Karcher M22 adapter, 1 x nozzle, 1 x swivel nozzle, 1 x PTFE tape Installation Unfold the high-pressure hose and extend it before use. Connect the fitting to the corresponding pressure washer gun. Use Use the nozzle with 3 rear nozzles at 33 degrees to clean and rinse debris from drain pipes. The swivel nozzle with 1 nozzle A 0-degree angle helps eliminate blockages. Other information: The inner tube is made of thermoplastic polyester. The reinforcement layer consists of a high-strength polyester mesh. The top layer is made of thermoplastic polyurethane, providing resistance to weathering, oil, abrasion, and ozone. Note: Should only be connected to a pressure washer, not directly to a tap. Due to manual measurement, dimensions may have an error of 2 cm / 1 inch. Colors and sizes may vary slightly depending on monitors and angles.