16-Piece Damaged Glow Plug Removal Tool Kit for 8mm and 10mm Glow Plugs, Glow Plug Repair Kit for Engines, Glow Plug Removal Tools

APPLICATION: Professional glow plug removal tool, specially designed for removing and repairing glow plug threads. Particularly suitable for removing broken glow plugs from cylinder heads. This glow plug tool kit is designed for 8mm and 10mm glow plugs. Before purchasing, ensure that your glow plug thread is compatible with the thread repair kit. INSTALLATION STEPS: First, remove the back end and the broken portion of the glow plug. Mark the drilling depth and keep the drilled hole straight. Clean any glow plug residue from the cylinder threads. Use a star wrench with a 3/8" (E10) socket and a glow plug extractor to remove the glow plug. Install a new glow plug. TOOLS INCLUDED: This glow plug thread removal and repair tool kit contains a 1/4" NF228/M8/M10 tap, ratcheting tap T-handle, glow plug extractor, step drill bit, and all the adapters specifically needed for glow plug removal and repair. MATERIAL: This 16-piece glow plug repair tool kit is made of high-quality carbon steel, which is very strong and durable. The surface of the glow plug removal tool is corrosion and wear resistant, ensuring a long service life. You don't need to buy it frequently, but you can use it for a long time. PRACTICAL STORAGE: The storage case is specially designed for glow plug repair tools. Each tool has its place. Thanks to the special structure inside the box, even small tools can be securely held and won't get lost. Our glow plug tool is ideal for removing the threads from 8 mm and 10 mm glow plugs. This glow plug repair kit contains all the necessary components, including a 1/4" NF228/M8/M10 tap, a ratcheting tap T-handle, a step drill bit, and a removal screw. Installation steps: 1. Remove the rear end of the glow plug using a star wrench with a 3/8" (E10) socket, remove the insulating plastic, and remove the damaged head using pliers (not supplied). 2. Mark the drilling depth, use a step drill bit and a pilot drill bit, and keep the drill bit straight. 3. Clean any glow plug residue from the cylinder threads. 4. Repair the cylinder threads with a tap. 5. Use the glow plug removal screw and extractor to remove the glow plug. 6. Install a new glow plug and the installation is complete. Note: 1. When drilling, do not drill past the marked thread and keep the drilled hole straight. Features: Dimensions: Tap: 1/4" NF228 / M8 / M10 Ratcheting tap T-handle: Length 252 mm / Width 102 mm Impact extractor: Length 155 mm Glow plug extractor: Length 157 mm Step drill bit: 5.5 x 97 mm Pilot drill bit: 3.5 x 70 mm Centering sleeve length: 4 cm Material: Carbon steel Package contents: 1 x Ratcheting tap T-handle (for tap) 1 x Star wrench with 3/8" (E10) socket 1 x Glow plug extractor 1 x Allen wrench 1 x Extractor impact driver 2 x centering sleeves 2 x pilot drill bits 2 x step drill bits 2 x disassembly screws 3 x taps