160° Recessed Motion Detector Wall Switch for LED and Halogen Bulbs (1)

General Description

Recessed wall-mounted motion detector switch, ideal for LED and halogen lamps and bulbs. This device starts working from 1W, making it particularly suitable for LEDs. It functions as an on/off switch with an adjustable twilight switching threshold and a switching duration of 10 seconds to 7 minutes. It directly replaces a standard switch, but is not suitable for speed control.

Technical Specifications

• Detection angle: 160°
• Maximum range: 9 m
• Recessed dimensions: 49 x 49 x 30 mm
• Decorative panel dimensions: 80 x 80 mm
• Installation height: 100-180 cm
• Protection: IP20 (for indoor use only)
• Voltage: 230 V ~ / 50 Hz
• Standby power consumption: 0.1 W
• Operating power consumption: 0.45 W
• Power range: 1-500 W for resistive loads (incandescent bulbs), 1-200 W for inductive loads (LED lamps, fluorescent tubes) fluorescent)

Compatibility and accessories

• Suitable for 60 mm and 68 mm diameter recessed boxes