160M self-priming booster pump 220V 120W water pump domestic water supply system automatic household stainless steel booster pump for water heating solar water filter pipeline （EU Plug）

Description

A self-priming booster pump is a widely used pump that pumps tap water into the pump by attracting air from the pipe to achieve the purpose of a booster. Compared with traditional pumps, our water transfer pump is more efficient, stable, and easy to use. The automatic pressure protection and overheating protection design give it a higher level of safety and security. It will be your right hand for water transfer!

 

Key Features

High-quality Material: Steel tube motor, nylon pump head, and rubber diaphragm have strong chemical resistance, high-temperature resistance, and long service life.

 

Easy to Use: It can suck water by itself without the need for water diversion and extra equipment or auxiliary tools, thus making it more convenient for you to use in some outdoor occasions. All you need to do is connect the hose and accessories, plug it in and it's ready to go to work.

 

High Efficiency: The 120W all-copper motor, 1.35-1.45 gal/Min flow rate, and 3.28 ft self-priming height can meet various needs of users and achieve faster water supply.

 

Safety Protection: Its automatic pressure protection design can automatically detect water flow and pressure to prevent equipment damage due to overload or malfunction, etc. And it also has overheating protection and can withstand medium temperatures of up to 149℉.

 

Easy to Maintain:  It comprises various components, including a motor, pump body, pump wheel, and mechanical seal without excessive accessories or auxiliary equipment. The simple structure makes maintenance and servicing relatively easy without extra expense and time cost.

 

Low Noise: The low noise motor (about 70-80dB) does not produce excessive working noise, and thus can provide you with a quieter working environment.

 

Easy to Carry: The small size (10.2*3.9*4.1 inches) and lightweight (6.28 lbs) make it more convenient to carry. You can take it with you wherever you need to work.

 

Details

Feet:  The four feet with holes facilitate installation and enhance the stability of the product, thus guaranteeing it runs more smoothly and efficiently.

 

Anti-vibration Pad: It can effectively reduce the vibration amplitude of the product and avoid the body from being knocked accidentally.

 

Special Valve: The special valve for liquid input and output has stable performance and can effectively improve self-priming efficiency.

 

Long Power Cord: The 6.23ft long power cord can effectively reduce the distance limitation of your use, thus providing you with higher freedom of use.

 

Application

It is widely used in general industrial equipment, pharmaceutical equipment, chemical equipment, sprayers, and spraying devices of high-pressure equipment, etc. It is suitable for agriculture (lawn and garden), tourist vehicles, special vehicles, ships, vehicle cleaning, air conditioning cleaning, carpet cleaning, floor cleaning, water purification, filtration equipment, chemical metering, fluid supply, food and beverage filling, liquid transfer, etc.

 

How to Use                 

1. Please make sure the end of the outlet hose is properly connected.

2. Carefully plug the pump into a  220-volt, 50 Hz, grounded AC outlet to begin operation.

3. The pump is self-priming and water should begin to flow in 30 seconds or less. (a) If water does not flow, unplug the outlet and check how the pump is installed and the inlet and outlet connections. (b) Operating the pump without water for an extended period of time may damage the pump and cause it to malfunction.

4. Please unplug the pump when pumping is completed. The pump may become hot during operation. Please be careful when near or touching the pump.

 

Specification

Material: Rubber, Steel, Nylon

Color: Black

Run Dry: Yes

Assembly Required: Yes

Item: DP-160M

Plug Standard: EU Standard

Voltage: 220V

Amp Draw: 0.55A

Type: 3 Chamber Diaphragm

Flow: 5.1-5.5L/Min, 1.35-1.45gal/Min

Maximum Withstand Temperature: 65℃/149℉

Insert Size: 9.5mm/0.37in Hose Barb, Thread

Outlet Size: 9.5mm/0.37in Hose Barb, Thread

Self-Priming: 0.5-1m/1.64-3.28ft

Max Pressure: 160Psi(11Bar)

Maximum Working Pressure: 80-90 Psi

Power Cord Length: About 1.9m/6.23ft

Power of Motor: 120W

Working Noise: Approx. 70-80dB

Net Weight: 2.85kg/6.28lbs

Gross Weight: 3kg/6.61lbs

Product Size: 26*10*10.5cm/10.2*3.9*4.1in

Package Size: 34*12*10.5 cm/13.39*4.72*4.13 in

 

Package Included

1 * Water Transfer Pump

1 * English Manual

All Accessories for Installation

 

Notes

1. Only clean water can be pumped, and liquids with impurities cannot be pumped.

2. Products with electrical plugs are designed for use in the EU. Please check compatibility before purchasing.

3. When the pressure switch is stopped, the pressure is 160 Psi. The maximum working pressure is 80-90 Psi.

4. This is a self-priming pump, so please do not wet the motor.

5.  Before first use, for avoiding running the pump dry, please fill the pump head with water to wet the impeller, thus.

6. This product does not include water inlet and outlet hoses, so please configure them yourself.

7. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.