180-Piece Black Waterproof Heat Shrink Tubing Kit - 3:1 Double-Walled Heat Shrink Tubing - Adhesive Coating - Heat Shrink Tubing

3:1 SHRINK RATIO - Retracts to one-third of its original diameter and ensures an optimal seal. Eliminates the problem of 2:1 tubing that doesn't shrink sufficiently.

ADHESIVE INSIDE - When heat is applied, the adhesive expands and seals the connection, creating a durable, airtight seal.

VARIETY OF SIZES - We've included 7 of the most commonly used diameters, ranging from 2.3 to 19.05 mm. The heat shrink tubing is pre-cut to 89 mm.

EASY TO USE - Simply slide the heat shrink tubing onto your connection point and apply heat. Professional connections made in seconds.

DOUBLE-WALLED TUBE - The outer wall provides abrasion resistance.

The inner wall creates a watertight seal and strain relief.

Product Description

HEAT ACTIVATED ADHESIVE

Creates a watertight seal

Greater tensile strength

Resistant to stretching and vibration

3:1 SHRINK RATIO

Returns to one-third of its original diameter

More versatile than 2:1 sleeving

No air gap between wire and sleeving

WATERPROOF

The connection is watertight

Protects wires from corrosion

Can be immersed in water

Super versatile heat shrink tubing

Looking to repair damaged wire, seal moisture, or provide better strain relief?

Waterproof heat shrink tubing is an easy-to-use solution for electrical wiring projects in the automotive, marine, DIY, and home sectors. It can be used in a variety of applications such as:

Electrical insulation (wire repair, insulation of wires in electrical connectors, protection of charging cables, insulation of solder joints).

Environmental seal to protect against moisture, UV radiation, and fuel.

Strain relief for electrical connectors.

Wire and cable identification (color coding).

Grouping of loose wires (usually in wire bundles).

Creating thermal insulation for heat-sensitive components.

Protecting surfaces from abrasion, peeling, and denting.

3:1 shrink ratio heat shrink tubing.

When heat is applied, this heat shrink tubing recovers to one-third of its original diameter.

Its high recovery rate allows most damaged cable jackets to be repaired without removing the connectors. Therefore, 3:1 heat shrink tubing can be used in many more applications than 2:1 heat shrink tubing. Furthermore, 3:1 marine heat shrink tubing shrinks more tightly around wires and connectors, eliminating any air gaps. Heat-Activated Adhesive Lining: This is a waterproof heat shrink tubing with an internal adhesive layer. When heat is applied, the heat shrink tubing straightens and the internal adhesive layer melts. A thin bead of clear adhesive (approximately 1 mm wide) becomes visible at the end of the heated tubing. Once cooled, it forms a rigid seal. The heat-activated adhesive bonds strongly to wires, connectors, or any other surface. When the glue flows, it displaces the air and fills the gaps between the wire and the tube, creating a watertight connection. For best results, we recommend using a heat gun.

Double-Wall Heat Shrink Tubing

The marine-grade, double-wall heat shrink tubing offers superior rigidity and abrasion resistance. The double-wall design provides increased wear resistance. This wire heat shrink tubing is flame retardant.