1pc 0-10V Anolog Quantities Voltage Signal Isolation Module S-10V10V for PLC/MCU

1、This isolation module need two complete independent DC12-32V power supply.

2、Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal.

3、Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system.

4、It will has better performance if install this module and controller in a metal box and box is grounded.`

5、The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated.

Features:

This isolation module need two complete independent DC12-32V power supply.

Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal.

Used

to isolate high voltage or strong interference voltage or current

(voltage) signal then transferred to PLC or controller MCU, isolating

controlling end and controlled end, to assure stability and

anti-interference ability of system.

It will has better performance if install this module and controller in a metal box and box is grounded.

The

potentiometer is used to amend corresponding relation of output

voltage. Output voltage can be fine adjusted and calibrated, normally it

has already been calibrated.

Specifications:

Model: S-10V10V (single channel input)

Power Supply:12V-32VDC

Input: 0-10V analog voltage signal

Output: 0-10V analog voltage signal

Conversion Accuracy: ±3%

Conversion Speed: ≥200MS

Size: 8.5*3.5*2.8cm/3.3*1.4*1.1in

Weight: 39g(approx.)

Wiring:

1) Input Voltage Terminals:

HVIN: 12V-32V power supply positive

HGND: 0V power supply negative

AI1: Analog input first channel (0-10V voltage)

AI2: Analog Input second channel (0-10V voltage)

2) Output Voltage Terminals:

VIN: 12-32V power supply positive

GND: Power supply negative

A1O: Analog output first channel (0-10V voltage)

A2O: Analog output second channel (0-10V voltage)

Package Includes:

1 x Isolation Module