1pc Aluminum Foil Butyl Sealing Tape, Duct Tape, High Temperature Duct Tape, Roof Repair, Asphalt, Sealing, 5cm x 5m Self-Adhesive

Versatile Applications: Our butyl tape is suitable for repairing household leaks, roof cracks, leaky windowsills, gutters, plumbing, RVs (indoor and outdoor), bathrooms, tunnels, subways, windows, tanks, levers, pipes, and roofs. Durable Material: High and low temperature resistant, wear-resistant, easy to apply, stretchable, impact-resistant, waterproof, flame-retardant, and aging-resistant. Self-adhesive and breathable tape; no additional adhesive required. Easy Application: Simply peel off the protective film and remove the desired piece of butyl tape. The double-sided tape provides very strong adhesion. Once applied to a surface, it is not easy to remove. Remove only a small section of the sealant at a time. Professional Butyl Rubber and Aluminum Foil Sealing Tape: Aluminum foil effectively reflects UV rays. The butyl adhesive ensures strong adhesion, stable contact with water, and an airtight seal. The tape is heat-resistant up to 80°C, dimensionally stable, and resistant to deformation. Product Description: Specifications: Material: Butyl Rubber; Size: 5cm; Quantity: One Roll; Properties: The aluminum sealing tape is suitable for all exterior sealing projects and adheres to wood, stone, plastic, steel, concrete, and glass. It is versatile and solves various water infiltration problems. Application: Remove dust, gravel, etc. around the joints (let the joints dry in the following days). Measure the required length, cut it to size, and prepare it for application. Peel off the protective film, apply the tape to the joint, press it firmly, and ensure it is firmly in place. After completion, do not allow it to get wet or tear to avoid compromising the seal. Tools Required (not included): Cleaning tools, tools, spare tools, gloves. Application Notes: Regardless of the type of water damage to buildings, pipes, or tanks, sealing and subsequent repairs must be performed on the water side. Before starting work, remove dust from the work surface to ensure a clean substrate and optimal rubber adhesion. It is recommended to seal cracks in concrete that are 10 cm or 15 cm wide!