1pc Wideband 0.02‑3GHZ Gain 20DB RF Power Amplifier Module Board Radio Frequency

1、Double sides adopt the process of immersion metal, make the printed circuit surface is stable with color, brightness and smooth coating, good welding property.

2、Ultra bandwidth, high reliability, not easy to corrode and fall off.

3、Power supply voltage: typical +5V(typical current value 90mA).

4、Max. output power: P1db +20dBm@2GHz. Input signal: Features:

Double sides adopt the process of immersion metal, make the printed circuit surface is stable with color, brightness and smooth coating, good welding property.

Ultra bandwidth, high reliability, not easy to corrode and fall off.

Power supply voltage: typical +5V(typical current value 90mA).

Max. output power: P1db +20dBm@2GHz. Input signal: <+10dBm.

Gain: typical value of 20dB@2G. Input output impedance: 50 Ω.

Maximum Output power: P1dB +22dBm typical, +39.5 dBm Output IP3.

Specifications:Bandwidth: 0.02-3GHZ(Different frequency gains are slightly different )Noise coefficient: 4.1dB@1GHzSize: Approx. 7*4.5*1.3cm / 2.8*1.8*0.5inchWeight: 40gPackage Included:1 x RFPower Amplifier

Note:

Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.