1x Carbon Monoxide Smoke Detector, XU, Smoke Detector, Carbon Monoxide Alarm -

Product description:

Carbon monoxide is a colorless, tasteless and odorless gas, non-irritating and harmful, which kills families every year.

The main cause of CO poisoning in everyday life is lack of precautions when using fire, heating and the bathroom at home. In most cases of CO poisoning, people barbecue, heat with charcoal, or bring a generator into the house in the event of a power outage.

To prevent CO poisoning, installing CO detectors in areas likely to produce CO, such as kitchens and bathrooms, can help detect CO leaks in time. You must install these detectors even if there is no actual source of CO emissions in your home.

CO detectors are self-contained, battery-powered carbon monoxide (CO) detectors with built-in CO sensors that protect you and your family from the dangers of CO.

If you use a gas stove, oven or fireplace in your home, a CO detector is a convenient system that detects carbon monoxide even at low concentrations and can trigger not only an audible, but also a visual (flashing red light) alarm to protect you from carbon monoxide poisoning.

Important note:

This product is only used to detect carbon monoxide, not carbon dioxide.

After installing this product, you will no longer have to worry about this colorless, odorless and tasteless gas.

Product features:

Loud 85 dB alarm (85 dB / 3m)

Test/reset button

Electronic sensor

Save maximum level indicator

LCD display of CO concentration (ppm)

LED control indicator (red = alarm, green = operating)

Warning when battery level is low, powered by three 1.5 AA batteries.

Acoustic mode with four short warning tones. In alarm mode, the red light flashes.

Ideal mounting location:

Wall or ceiling mounting.

Minimum distance of 3 m from a fire source.

Do not place in a ventilated area (fan or air conditioning).

The installation location requires free access to ambient air (e.g. not behind curtains).

Technical characteristics:

Power supply: 3 AA batteries, 1.5 V

Sensitivity and duration: 50ppm, alarm within 60 ~ 90 minutes

100 ppm, alarm within 10 ~ 40 minutes

300 ppm, alarm within 3 minutes

Standby current: <50 uA (without LCD); <200 uA (with LCD)

Alarm current: <75 mA

Environmental operating conditions: 5-40°C, 20-90% relative humidity.

Please note:

If the CO detector does not display anything on the LCD after installing the batteries, or if no audible alarm sounds or no LED flashes when you press the button, try adjusting the battery contact spring according to the following instructions.

Scope of delivery:

1x carbon monoxide detector (battery not included)

• This product is sold by xiaosong on behalf of third parties. This is a compatible product. Thank you for your understanding and support.