2.5-inch Aluminum Turbo Blow-Off Valve – 8 Relief Ports – Pressure up to 30 PSI – Compatible with TYPE-S and TYPE-RS - FPG250

General Description The aluminum Turbo blow-off valve is designed to optimize the performance of your turbo. This blow-off device is installed on the intake manifold to prevent supercharger overboost. Thanks to its innovative design, it uses an intake pressure signal combined with spring force to detect throttle closure, allowing for rapid pressure release. With its 8 blow-off ports, it delivers an aggressive blow-off sound typical of JDM racing. Technical Specifications Item Type: Blow-off Valve Material: Aluminum OEM: SDD-BOVGRSBL, FPG250 Flanged Hose Size: Approx. 2.5 inches / 6.4 cm Maximum Boost Pressure: Up to 30 PSI Mounting Design: 2 Bolts Valve Diameter: 40 mm Compatibility and Accessories Compatible with TYPE-S Blow-off Hose Flanges Compatible with TYPE-RS Blow-off Hose Flanges Package List: 1 x Turbine Valve, 1 x Hose, 1 x Flanged Hose, 1 x Hose Interface Flange, 1 x gasket, 4 x clamps, 2 x nuts, 2 x screws, 2 x brackets. Installation: For proper installation, it is recommended to check your item's part number. Ensure all components are present before proceeding with installation. Use: This blow-off valve is used to relieve pressure in the intake system when the throttle is closed rapidly, helping to prevent pressure fluctuations and unstable airflow. Other information: Please contact the seller if you have any doubts about the item's compatibility before purchasing to avoid unnecessary returns.