2-barrel carburetor for Ford F150 F250 289 302 351 Jeep 360 engines 1964-1978--BIEMMEDUE

Introduction: A carburetor is a device used to mix air and fuel in the correct ratio for combustion in internal combustion engines. The fuel-air mixture is too rich when there is too much fuel and too lean when there is too little. Therefore, a high-quality carburetor is highly recommended to ensure smooth engine operation and a pleasant driving experience. The compatibility information is for reference only. Please compare your carburetor to the illustrations before ordering. Due to varying engine conditions, adjustments may be necessary during installation. Fits: Jeep Wagoneer (1964–1978) with 360-cup engine; Ford Mustang (1968–1973) with 289-cup, 302-cup, and 351-cup engines; Ford F100 (1964–1978) with 289-cup, 302-cup, and 351-cup engines; Ford F250 (1964–1978) with 289 cup, 302 cup and 351 cup engines; Ford F350 (1964–1979) with 289 cup, 302 cup and 351 cup engines; Ford F150 (1964–1978) with 289 cup, 302 cup and 351 cup engines; Ford Comet (1964–1982). Engines 289 Cu, 302 Cu, 351 Cu (Compatibility is for reference only. Please compare your carburetor to the images before ordering. Due to varying engine conditions, adjustments may be necessary during installation.) Part Number: 2100 A800, 2100-A800, 2100A800 Specification: Type: Automatic/Electric Choke Material: Aluminum Alloy Venturi Diameter: 24 mm Hole Spacing: 131 × 88 mm (center to center) Intake Side Inner Diameter: 39.7 mm Choke Funnel Outer Diameter: 130 mm Weight: 2.86 kg Package Size: 30 × 23 × 17 cm Note: Please allow 1-2 mm measurement deviation due to manual measurement. Features: 1. Mixes air and gasoline in the correct ratio for optimal engine performance. 2. Gives your machine the new power it deserves. 3. Reliable quality with a 2-year warranty. 4. Wide compatibility. Package includes: 1 x sealing ring. Condition: 100% new. Accessories: You will receive exactly what is shown in the picture above. NOTE: *The carburetor's oil passages can become clogged if not cleaned. Please clean the oil passages and air filter and use clean fuel before installing the carburetors. *Please check the carburetor dimensions and compare your old part number with your vehicle's to ensure you order the correct part. *Professional installation recommended. We recommend having the installation performed by a qualified mechanic experienced in this type of work. (No instructions included)