2-hole hose clamp, diameter 100 mm, 4 pieces, for fixing heavy-duty pipes

Dimensions and quantity: Contents: 4 fixing clamps, thickness: 2 mm, width: 20 mm, fixing hole diameter: 12 mm x 8.5 mm, suitable for tube Ø 100 mm.

Reinforced design: stainless steel clamps with a maximum thickness of 2 mm; the mounting clamps are made of 304 stainless steel, resistant to high temperature up to 600°C and low temperature up to -50°C. They are suitable for piping systems requiring high temperature resistance and relatively large loads, and provide reliable fixing support.

Reinforced ribbed structure: The mounting flange is designed in one piece by stamping, bending and U-cutting, which particularly strengthens the ribbed structure, thereby increasing strength and resistance to deformation. This design also allows for better distribution and absorption of stress and vibrations.

Scope of use: These pipe clamps are widely used for fixing pipes to floors, ceilings and exterior walls. They can be used for fixing heat pipes such as hot water, steam, water supply and heating pipes, as well as sprinkler systems, in high temperature piping networks.

Installation method: Select the clamp size suitable for the outer diameter of the pipe, determine the position of the holes according to the holes and the location of the clamp, and then tighten the screws. You can place a thin washer of soft material between the clamp and the hose to reduce vibration and noise.

-Contact our customer service in case you need further assistance