2-in-1 Water Cooler, 35L 1-3L Aquarium Heater & Cooler for Jellyfish, Coral Reef Shrimp, 100W Industrial Cooler with Pump, Recirculating Cooler for Machinery (EU)

Features: 1. Uses solid-state refrigeration, environmentally friendly and pollution-free, greatly assisting the process. 2. Silent operation, low power consumption design, ideal for aquarium use, supports both cooling and heating, very powerful. 3. Adopts digital display and advanced intelligent microcomputer temperature control technology. 4. Provides Celsius and Fahrenheit temperature switching function, very convenient. 5. The product can be used for small-scale refrigeration and heating, aquaculture, and aquariums. Specifications: Item Type: Electronic Water Chiller Material: ABS + Metal Purpose: Plumbing Equipment Model: STC-200 Model STC-200 35L Rated Voltage: DC12V Power: 100W Circulating Water Pump Flow Rate: 1-3L/min Suitable Range: Water pump with a vertical lift height of three meters below. Cooling Water Capacity: ≤35L Suitable Water Pipe Inner diameter eight millimeters. Product size (approx.) 115 x 110 x 190 mm / 4.5 x 4.3 x 7.5 inches. Net weight 1.80 kg / 4 lb (approx.). Includes: Two meters of water pipe, two hose loops, a water pump, a power adapter, and instructions for connecting the water pipe to a power line: The 2 meters are divided into two sections (the length can be adjusted according to your needs). Place the hose loops onto the pipe, connecting the inlet and outlet sections. Secure the loops firmly. Once connected to the pump and power supply, it can be used directly. 1. Turn on the power; water should begin to flow. Check for leaks. 2. Connect the power cord of the cold water chiller, plug in the power cord, and press the power switch to turn on the power. The display screen will show the water temperature in the aquarium. Installation and Use: A. Install the connection as shown in the diagram. B. The machine and surrounding areas should be at least 20 cm apart to facilitate heat flow. C. Please handle with care during transport, installation, and maintenance. Temperature Control Setting Method: The SET light will illuminate to indicate the setting state, and the water chiller will begin operating. SET button: Set button, ENTER button: Confirm, Heat + button, Cool - button: Briefly press the SET button (to set the temperature), then press the + or - button until the desired temperature is reached. (Set after pressing "ENTER" or 10 seconds after automatic return to the current temperature) Detailed function table: 1. In normal display mode, press and hold the "S" button to display P0. Press the "S" button again to select P0-P5 (each press of the "S" button displays the cycle increments from P0 to P5). Press the "E" button to confirm, then press the ▲ or ▼ button to set the thermostat function. 2. As shown in Table Two. (After setting, press the S key for 10 seconds to automatically return to the current temperature.) Symbol Meaning Degrees Celsius Degrees Fahrenheit Default Value P0 Cooling, heating, cooling mode C/H/ CH C/H/CH C P1 Return temperature 0.1~15 0.1~27 2 P2 Correction temperature -7~7 -13~13 0 P3 Time delay (min) 0-10 0-10 3 P4 High temperature alarm temperature -50~110 -58~230 110 P5 Temperature pattern (degrees Celsius and Fahrenheit) CCCC/FFFF CCCC/FFFF CCCC Sensor fault display E1, close all outputs 1.This product is shown with a cooling water temperature of 28°C. No high-power lights or submersible water pumps are used, and it is assumed that the water temperature can be reduced to approximately 25°C. The higher the water temperature before cooling, the less cooling water is required. The amount of hot water used in the cold water machine is equal to the cooling capacity of the refrigeration system. 2. The upper temperature limit for this product is 40°C, and the lower temperature limit is 10°C. Danger: When installing a cold water machine or when placing your hands in water, always unplug the power cord first. If thunder is approaching, please unplug the electric wiper head. To prevent the use of a wet grip, unplug the power cord, otherwise it may cause electric shock or injury. Please use a dedicated power outlet; do not share the same outlet with other high-power electrical devices at the same time to avoid excessive current that could cause a fire. Do not use for extended periods; please unplug the power cord to avoid short circuits, appliance aging caused by spontaneous combustion, etc. Place the device in a position higher than the aquarium and take care to prevent water from running down the power cord to the plug. Do not fill the plug and socket with water during use. Children should not operate the device unattended to avoid electric shock injury. Caution: Please use an AC220V or 110V power supply; do not use any other power supply (supply voltage varies depending on the region of use and is not universally applicable; please note); Do not place this product in a stable location, at high temperatures, in direct sunlight, in smoke, in a poorly ventilated area, or in a humid environment; Do not block ventilation openings. Do not store foreign objects near the vents; do not insert metal debris, wires, needles, or other foreign objects into the product or its compartments. Caution: When using the product, do not invert or lay it horizontally; when unplugging, hold the plug handle; do not pull the power cord. Package List: 1 x Electronic Water Cooler, 1 x Power Adapter (10A), 1 x Water Pump, 1 x Power Cord Plug, 1 x Hose, 2 x Hose Loops, 1 x User Manual (2 pages). Note: 1. Do not use outside the voltage and current range. 2. When in operation, the operating indicator is red. 3. Please note that the new and old types of this product will be sent randomly; please ensure this is acceptable before ordering.