2-Pack Wall Detectors — 7-in-1 Wall Scanner with LCD Display and Audible Alarm, Detects Metal, Wood, and AC Wires (Black)

✅Product Details:

This 7-in-1 multifunctional wall detector offers 5 modes and 2 functions, allowing the detection of studs, wood, metal, and live wires. The detection depth for wood is 12 mm, 25 mm, and 38 mm, respectively; for metal, it exceeds 60 mm; and for live wires, it has a maximum depth of 51 mm.

✅Specifications:

Operating Current: <20 mA

Wire Detection Mode (depth up to 51 mm)

Operating Temperature: 0–40 °C

Battery: Low battery indicator

Metal Detection Depth: >60 mm

Material: ABS

Product Dimensions: 135 × 65 × 26 mm

Location Method: Stud Detection and Edge Detection

Detection Depth: 3 Stud Detection Modes (12/25/38 mm)

Alarm: Audible Alarm

Battery: 9V Battery (not included; sold separately)

Display: LCD screen and tri-color LED display for measurement results

Package Contents:

2 * Wall Scanners

2 * User Manuals

✅Features:

💚LCD Display and Audible Alerts: This multifunctional wall scanner features a graphic LCD screen that displays the scanning mode, calibration status, and remaining battery life. It is battery operated and also has a backlight for ease of use. Even in complete darkness. An audible signal alerts you to the presence of a stud or electrical cable. Whether it's a stud, metal, or an electrical cable, you can pinpoint its location quickly and accurately. 💚Two additional functions: The detector is equipped with a 5 cm ruler on the top edge, allowing you to mark the center point and make additional marks nearby. It also includes a bubble level, enabling you to check the alignment of objects after drilling. 💚Five detection modes: This wall detector offers five detection modes: stud detection at depths of 12 mm, 25 mm, and 38 mm; metal detection at depths greater than 60 mm; and live cable detection up to 51 mm deep. 💚7-in-1 Multifunctional Wall Detector: You will receive a wall detector and a user manual. This detector features five modes and two additional functions. Additional items (a ruler and a spirit level).

💚Calibration before use: Place the detector against the wall you wish to scan. Press the "Mode" button to turn on the device, and then press the "Measure" button. The opening shown on the LCD screen will gradually narrow until a beep sounds, indicating that calibration is complete and the device is ready for use.