2-Piece Gate Remote Control, 433.92 MHz Garage Door Remote Control, C@me Remote Control Compatible with 433.92 MHz EV, NA, EE Remote Controls, 2 Channels

【Compatible Models - Attention】This remote control is only compatible with 433.92 MHz EV, NA, and EE remote control ports/receivers. Other models are not supported. This is not a universal remote. 【433.92 MHz】The garage door remote automatically recognizes the ASK (433.92 MHz) signal, allowing you to open your garage door remotely without getting out of your car, making everyday use easier. 【Large Transmission Range】The remote control has a transmission current of 8-10 mA and a normal transmission range of 10-30 meters, with a maximum transmission range of 30-50 meters in open areas. 【Small Size】Measuring only 70 x 32 x 10 mm, this garage door remote control has an oval shape that makes it non-slip and easy to handle. 【24-Hour After-Sales Guarantee】We promise that our remote control is 100% compatible with the described model. If you cannot pair the remote correctly, please contact us. 【Compatible Models - Attention】This remote control is only compatible with 433.92 MHz port/receiver transmissions: EV, NA, EE remote control. Other models are not supported. This is not a universal remote. [433.92 MHz] The garage door remote automatically recognizes the ASK signal (433.92 MHz), allowing you to open the garage door remotely without getting out of your car, making daily use easier. [Large Transmission Range] The remote has a transmission current of 8-10 mA and a normal transmission range of 10-30 meters, with a maximum transmission range of 30-50 meters in open areas. [Small Size] Measuring only 70 x 32 x 10 mm, this garage door remote has an oval shape that makes it non-slip and easy to handle. [24-Hour After-Sales Guarantee] We promise that our remote is 100% compatible with the model described. If you cannot pair the remote correctly, please contact us. How to program it? Copying the remote control face-to-face Step 1: Erase the code from the new remote. ● 1: Press buttons A and B simultaneously until the LED flashes 3 times. (left to right, B) ● 2: Release button B (continue pressing button A) and slowly press button B 3 times; the LED will flash. ● 3: Release button A to stop erasing the code. Step 2: Copying the code from your old remote. ● 1: Place the duplicator as close as possible to the original remote. ● 2: Press and hold button A on the original remote, then press button A on the duplicator until the LED on the copier flashes. ● 3: Release both buttons to complete the code copy and copy the other buttons in the same way. Technical specifications: ● 1. Frequency: 433.92 MHz. ● 2. Code: fixed code. ● 3. Battery: CR2016 battery included. ● 4. Buttons: 2.