2-Piece Heavy-Duty Aluminum Alloy Hose Clamps for Shafts and Columns with 1/4 Inch Center Hole

Welcome to our shop! This heavy-duty shaft clamp is designed to provide a robust and reliable fastening for your mechanical applications. Made from high-quality aluminum alloy, the clamp boasts high hardness, excellent wear resistance, and exceptional durability. The fastening system utilizes an efficient clamping method. It incorporates a mounting mechanism with an M4 threaded hole on a 16mm grid for attaching the component to other parts, as well as a dedicated mechanism to firmly secure the clamp to the shaft. The double-bolt clamping system is a major advantage: you can tighten securely onto the shaft without worrying about distorting the spacing of the threaded holes required for mounting the assembly to other parts. Installation is flexible. You can first attach the clamp to a gear, sprocket, pulley, or wheel, and then assemble the assembly onto the shaft. Regardless of the installation position, the clamping mechanism on the shaft functions perfectly. The presence of mounting grooves is a key advantage, as the fastening and clamping mechanisms are completely independent. This allows installation in grooves in parts and in locations where other clamps could not be used. The design is optimized for performance. With balanced weight and volume around the central hole, this clamp effectively avoids centrifugal force and vibration caused by imbalance in high-speed applications. Its clamping length is greater than that of many other shaft clamps. This design significantly increases the contact area with the shaft at the bore, resulting in increased clamping force and pressure surface, thus providing better support against significant radial loads. Safety is guaranteed. The symmetrical double-bolt configuration, with a clamping bolt on each side, creates a balanced and firm clamping force on the shaft. This ensures that the components mounted on the rotating shaft will not move or loosen. **Product Details:** **Item Type:** D-Bore Shaft Clamp** **Material:** Aluminum Alloy** **Center Bore Shape:** D-Shaped** **Center Bore Diameter:** 1/4 Inch** **Thread:** M4** **Use:** To clamp the shaft column without damaging stationary parts. **Package Contents:** You will receive 2 D-Bore Shaft Clamps.