2-Piece Turntable Stylus with Cleaning Brush for AT LP60, AT PL300, AT LP60XBT, USB

Discover our turntable stylus, a high-quality accessory designed to revitalize your musical experience. This pack includes two replacement styli, a convenient storage case, and a dedicated cleaning brush.

**Wide Compatibility:**

This stylus is fully compatible with AT3600, AT3600L, AT3601, AT3651, AT3650L, AT3650C, AT3650, and AT3626 cartridges. It is ideal for use with the popular Audio-Technica AT LP60X, AT LP60XBT, and AT LP60XBT USB turntables. Its exceptional playback life exceeds 1000 hours, which is equivalent to approximately 750 standard 12-inch vinyl records.

It supports standard rotation speeds of 33 1/3 and 45 RPM. **Advanced Design for Optimal Sound:** The stylus features an oval-shaped diamond tip. This innovative design allows it to fit perfectly and deeper into the record groove, capturing even the finest details of the recording. The result is stable and accurate playback, delivering a rich, full, and perfectly nuanced sound. **Performance and Durability:** Its cantilever (stylus holder) is made from a single piece of solid carbon fiber, combined with a dual dynamic magnet system. This robust construction minimizes the risk of deformation or breakage. The lightness and strength of carbon fiber reduce the mass at the tip, allowing the stylus to flexibly and precisely follow the micro-movements of the grooves, even on complex musical passages. **Simplified Installation:** Replacement is simple. Before installation, locate the tabs on the stylus body and the corresponding notches on the bottom of the cartridge. Avoid touching the diamond tip. Hold the stylus by its sides, insert the tabs into the notches, and rotate the stylus body upward until it is firmly in place, with no play between the top of the stylus and the cartridge head. **Complete Packaging and Protection:** Aware of the fragility of this component, we ship it in a special plastic case with protective foam to ensure it arrives in perfect condition. The pack also includes an essential cleaning brush to maintain your stylus and records, ensuring optimal audio performance over time.

**Technical Specifications:**

* Item Type: Turntable Stylus

* Body Material: ABS

* Stylus Type: 0.6 Mil Elliptical Diamond

* Impedance: 20Ω

* Output Voltage: 3.2 mV at 1 kHz, 33 1/3 RPM

* Frequency Response: 10 - 45 kHz (+2 dB)

* Recommended Tracking Pressure: 3.0 g (effective range: 2.5 - 3.5 g)

**Non-exhaustive Compatibility List (cartridges and turntables):**

Wide compatibility with many models from brands such as Audio-Technica, JVC, Pioneer, Sansui, Sanyo, Teac, Toshiba, Aiwa, Akai, Dual, Hitachi, and many others (listed references: AT91, ATN2002-2005, STY148/155, DN68, ND142G, PN230, CR249, DP-29F, PS-LX250H, etc.).