2 pieces/set metric Machine faucet high speed in steel 3 cannelures right threading tool of taraudage M8x1.25

Features:

1. Material premium-quality : the tap in steel fast have a hardness and a wear resistance high. The tap non revetus have that a substrate of base without no coating additional and fit to has wide range of applications.

2. Function: it there has a total of two tap to facilitate the alignment of the tap and of the hole of taraudage for ensure that the tap and the hole are perpendiculaires the a to the other and that they taraudent in softness. It has also a effect of lissage on the wire (removes the burrs).

3. Threading standard : design of threading metric standard, clearly and well stored, allows a removal fast of chips for a threading effective. Can create of new wires or reenfiler of wires damaged or coinces.

4. Wide application : suitable for the most of metals, plate of iron, copper, zinc, steel alloyed, steel abrasive, steel Has3, stainless steel, etc. add appropriate of liquid of cooling (for example of the water) can extend the Service Life when of the taraudage.

5. Industry applicable : the mini tap metric are mainly used for the clock, the shown, the wood of low hardness and the processing of holes in metal smooth. Mainly used for use manual, tap the large majority of materials in of conditions of holes traversants.

Specifications:

Item Type : Tap to threading manual

System : Metric

Number of threading : 3

Tolerance of threading : 0,014

Hole traversant/Hole borgne : Hole traversant

Material : Steel fast

Style of faucet : groove right

Code of threading : threading standard

Application : suitable for the steel thick, at the rubber, to the aluminum, at the copper and at the wood.

How use : 1. It there in has 2 in a set, and it can also be divise in first faucet and second faucet. 2. The function of the first faucet : the partie before of the first faucet has a cone, which is smooth and without threading (very little profond), of output that it is practical for the faucet of alignment with the hole of taraudage to ensure that the faucet is perpendiculairement at the hole and in tapotant smoothly. 3. The function of the second tap : In more than processing the marge of the first tap for meet to the standard, it play also a role in the cutting of the threading (removal of burrs). For the threading of holes borgnes, they can be tap toward the bottom. On can simply say that the first tap is a machining coarse and the second tap is a machining end. 4. Generally, the side of the piece which must be tap must be placed in position horizontale or vertically. Of this way, when of the taraudage of the threading, it is more easy of juger and of maintain the direction of the taraudage perpendiculaire to the surface of base of the threading of the piece. 5. When you start to tap the threading, test of positioning the tap the more possible, then press on l'axe of the tap of a main and faites pivot smoothly the hinge of the other main. When the tap turn of 1 to 2 lathes, observez of face or of side if the tap is perpendiculaire to the surface of base of the threading of the piece. If necessary, users a square for the corriger. Generally, after have tap 3 to 4 lathes of wire, the direction of the tap is essential determine. If you start to tap the threading in has way incorrecte, you can unscrew the tap, the corriger with the second cone, then tap the threading with the first cone. When the partie cut of the tap penetrate in the piece, no force axiale is required and the threading is natural screw. Can. 6. When of the taraudage of the threading, each times that the screw of hinge is turned, the advanced of the screw of the tap must not be trop IMPORTANT. Generally, it is recommended of advanced d'1/2-1 tour to each times, and the vissage of the faucet in below of M5 must not exceed 1/2 tour both ; When of the taraudage of wires end or of wires requiring a precision more high, the quantity of advanced must be reduced in has way appropriate to each times ; the speed of taraudage of the make can be convenablement more fast that that one of the taraudage of the steel. After each vissage, the reversed is d'approx. The course of vissage is of 1/2 of the course ; when you tap a threading more profond, the course of rotation is more large and it faut perform a movement alternatif several times for break the chips, this which favorise the removal of chips and reduces the phenomene of collage of chips on the cutting edge for maintain a cutting edge cutting edge ; In the same time, the liquid of cutting can penetrate in softness in the partie cut, which play a role of cooling and of lubrification. 7. When of the rotation of the lever of hinge, the two mains of the operations must be balance. users not trop of force and secouez to left and to right, otherwise it is easy of tear the profil of the threading and of provoquer a expansion of the hole threaded and aspect conical.

List of package:

2 x faucet to flute right 1 x storage box