2-Way Automatic Garden Watering Timer, 2-Outlet Irrigation Timer, Outdoor Watering Timer with Child Safety, Automatic and Manual Mode, Rain Delay

• 【2 automatic watering outputs】The 2-way watering controller functions as two separate single-outlet watering controllers and offers a wide choice of watering duration and frequency to make your watering fully customizable. Watering duration ranges from 1s to 99min, frequency from 1h to 15 days.
• 【IPX5 Waterproof & Leak-Free】The top connector has a universal 3/4" thread and fits most hose connections. This sturdy 2-outlet watering timer is made of 30% reinforced nylon, which is more durable than the Ordinary ABS material.
• 【Advanced Hardware】The watering timer solenoid valve adopts new airtight components so that it can withstand 0.05-0.8Mpa water pressure, the greater pressure endurance capacity frees you from worries internal leakage and contributes to a lot of energy saving, greatly extending the life.
• 【Child lock mode and rain delay】Child lock mode and manual rain delay, can effectively prevent accidental triggering by children and pets and avoid wasting water. Manual rain delay is available in our irrigation system to avoid over-watering and to save a lot of water on rainy days.
• 【Intelligent Power System】Intelligent remaining power display to ensure you know the available power. The powerful chip will detect the lack of power and turn off the hose timer before the battery runs out empty.

Product description

The water controller can be used for drip irrigation systems, sprinkler irrigation, etc.

2 independent outputs

The water programmer comes with 2 independent water valves allowing two zones to be irrigated at the same time.

30% reinforced nylon material.

Improved waterproof construction.

To ensure durability, the watering timer connectors are made of 30% reinforced nylon, capable of withstanding water pressure up to 145PSI. You don't have to worry about water leaks.

Anti-blocking, anti-leak

You don't have to worry about leaks - Improved waterproof construction. To ensure durability, the sprinkler connector is made of 30% reinforced nylon and can withstand water pressure up to 145PSI.

Technical specifications:

- Product size: 120 x 55 x 122 mm

- Product weight: approximately 400g

- Recommended water pressure: 0.05-0.8 MPa

- Suitable water temperature: 1-45°C

- Water inlet: 3/4 "internal thread

- Water outlet: 3/4 "external thread

- watering time: 1s-59s; 1min-99min

- Watering frequency: 1 a.m.-11 p.m.; 1 day-15 days

- Power supply: 2 * AA batteries (not included)

- Rubber rings: 3 mm or 5 mm