2-way motor valve DN15

Interface: DN15 = 1/2 inch; Flow rate: DN15 (1/2 inch): 11m3/h; Installation: - There are 3 wires on the valve. - First, plug in the yellow wire to N 220V. - Second, you need to find a switch to switch from the blue wire to L 220V and from the brown wire to L 220V. - When the blue wire is connected to L of 220V, the valve opens. After fully opening, the actuator turns off. - When the brown wire is connected to L 220V, the valve closes. After fully closing, the actuator turns off. - Note: The blue and brown wires cannot be connected to 220V L at the same time, or the valve will be damaged. Voltage: 220V AC; The maximum pressure is 1.0MPa. The nominal pressure is 1.6 MPa.