2 x Genuine Makita 18V 5.0Ah LXT Lithium Battery BL1850 + DC18RC Fast Charger

LXT Lithium-Ion battery and optimum charging system produces 280 percent total lifetime work with 2x more cycles. 5x Lower self-discharge keeps battery cells active and ready for use, even after long periods of storage.

Charging at any time will have no effect on the battery. Built-in shock absorbing features protect the battery. Sixteen firm holding contact terminals reduce the risk of power loss/fluctuation in high vibration work environments.

Battery's built-in Memory Chip communicates with the charger to maximize battery life using 3 Active Controls (Current, Voltage & Thermal). Battery suitable for all Makita li-ion LXT 18 volt machines.
Star Protected Makita Battery

The demanding applications you take on every day are also demanding on your cordless tools and batteries. You rely on your tools, so Makita created STAR Protection Computer Controls . STAR Protection is communication technology that allows the tool and battery to monitor conditions and exchange data in real time to protect against Overloading, Over-Discharging and Over-heating. Look for Makita tools and batteries with the STAR and get these protection features.

Makita Star Battery - Overload Protection
High-drain applications require maximum battery power. Makita tools and batteries are engineered for industrial applications, but sustained peak demand can overload the tool. Makita s STAR Protection Computer Controls allow the battery and tool to communicate and protect your tool and battery from overload by cutting power when put under abnormally high current draw.

Makita Star Battery - Overcharge Discharge Protection
Lithium-ion batteries are engineered for longer, sustained performance. But running a battery until it s dead empty can damage the cells. Makita STAR Protection Computer Controls monitor battery charge capacity, and if the battery is too low to complete the application it will cut power in order to extend battery life.

Makita Star Battery - Over heat protection
Extreme heat is the enemy of ALL batteries. It can make batteries charge slower, damage battery cells, and reduce battery life. Makita STAR Protection Computer Controls monitor battery heat during operation. If the battery reaches a certain level of heat it will cut power to the tool.

This battery is suitable for the following machines:
- BDF451RFE , BDF451RFE3
- BDF452RFE , BDF452REF3
- BDF452Z
- BDF453RFE
- BDA350 , BDA351
- BTD140RFE , BTD140RFE3 , BTD140Z
- BTL061RFE , BTL061Z
- BTW450RFE , BTW450Z
- BTW251RFE , BTW251Z
- BGA452RFE , BGA452RFE3 , BGA452Z
- BFR750
- BFR750RFE , BFR750RFE3, BFR750Z
- BFR550RFE , BFR550RFE3 , BFR550Z
- BCS550RFE , BCS550Z
- BSS501RFE , BSS501Z
- BSS610RFE , BSS610Z
- BJV180RFE , BJV180Z
- BPB180RFE , BPB180Z
- BJS130RFE , BJS130Z
- BJR181RFE , BJR181RFE3 , BJR181Z
- BJR182Z
- LXT600 , LXT400 , LXT202

The DC18RC has a cooling fan and Active 3 Controls.

This means that during the loading of the charging voltage, charging current, and temperature is held in the holes.

The cooling system blows cool air into the battery.

As a result, high temperatures occur in the battery, so that the battery life is extended, and the charging process is accelerated.

When used in conjunction with charging adapter ADP03 this charger offers also the possibility of charging Ni-MH slide on batteries of 9.6V to 24V batteries.

or when used with charging adapter ADP04 this charger offers the possibility to charge Ni-Cd and Ni-MH rod and block batteries of 7.2V to 18V batteries.

Included in this set

2 x BL1850 5.0ah Batteries
1 x DC18RC Fast Charger