20-Piece Car Front and Rear Door Panel Trim Fastening Rivet Kit

General Description

Introducing our new remote battery disconnect switch, designed to provide a convenient way to cut power to your vehicle. This electromagnetic switch allows you to move the trigger under the hood to your hand, offering remote control up to 48.78 meters. It is particularly suitable for cars, minivans, and agricultural vehicles, with an operating voltage of 12V and a voltage range of 11 to 15V. Technical Specifications: Item Type: Remote Battery Disconnect Switch; Material: ABS, Copper, Silver; Battery Model: CR2016 x 1 (Built-in); Battery Capacity: 75mAh; Operating Voltage: DC 11-15V; Rated Current: 120A - 200A; Starting Current: 200A - 360A (less than ten seconds); Standby Current: 0.005A; Switch Size: Approx. 45 x 45 x 45 mm (1.77 x 1.77 x 1.77 inches); Compatibility and Accessories: Fits most cars, small trucks, and agricultural vehicles; Included Accessories: 2 remote controls, 1 main power switch, 1 copper terminal, 2 clips Battery, 1 copper adapter Installation

Installing the switch is quick and easy. Follow these steps:

Connect the red wire to the positive terminal of the battery and the black wire to the negative terminal. The two large terminals on the relay switch are the main switch, an input line, and an output line. For the on/off control, connect the large terminal to the negative terminal of the battery. Operation

To use the switch, simply press the remote control to turn the battery power on or off. Note that it does not start the engine, but it provides added safety by disconnecting the power.

Other Information

After installation, be sure to disconnect the main power supply with the remote control when leaving your vehicle to prevent power loss. Note that disconnecting the power may affect the operation of the alarm and the onboard computer.