200 Pieces Insulated Wire End Connector Solder Joint, 4 Sizes 26-10 AWG with Heat Shrink Tubing, Electrical Terminals for Automobiles and Motorcycles, 3:1 Shrink Ratio

200 Pieces Insulated Wire End Connector Solder Joint, 4 Sizes 26-10 AWG with Heat Shrink Tubing, Electrical Crimp Terminals for Cars and Motorcycles, 3:1 Shrink Ratio Features: 【Save Time】 The cable connector with heat shrink tubing does not need to be soldered or crimped. A 1500W-2000W heat gun (not included) is all that is needed to evenly heat the connection of the two wires, saving time and improving work efficiency. 【High-Quality Material】 The shrink connectors are corrosion-resistant and waterproof. Each soldered connector has two waterproof hot melt adhesives to ensure high tensile strength, a watertight seal, and leak-proof functionality. 【Easy to Identify】 The cable connector sleeve features a transparent design, allowing for visual inspection when the wire is inserted, ensuring a successful connection. Solder wire connectors of various sizes are available in different colors for easy identification, and a storage box with a grid allows for neat sorting of the cable connectors. 【Widely Used】 These waterproof cable connectors are suitable for electronic engineering projects and are ideal for the automotive, marine, aerospace, electrical lighting, and electronics industries. They offer the most standardized and safest way to repair or modify components. 【Warm Tips】 The mating connectors are available in 4 different sizes: 40 pieces white (AWG 26-24), 80 pieces red (AWG 22-18), 60 pieces blue (AWG 16-14), and 20 pieces yellow (AWG 12-10). When using a heat gun (not included), maintain a distance of 3 to 5 cm from the heat-shrink tubing. If the heat gun gets too close, the wire connector will easily break.