200cm Insulated Door Bottom, Self-Adhesive Door Draught Excluder, Cold-Proof Silicone Door Bottom Insulation for Front Door, Interior Door (200 x 5cm, Grey)

Multifunctional Door Draft Excluder: The thermally insulated door draft excluder can effectively block airflow, preventing wind and heat loss in winter, and ensuring optimal cool air in the home in summer, ensuring an ideal room temperature. The self-adhesive door draft excluder also blocks light, prevents dust, insects, etc., and provides sound absorption, making it ideal for insulating the front door seal.

Triple Groove and Design: The bottom of the door features a three-layer hollow structure to ensure even distribution of force when the door seal rubs against the floor at the bottom. In addition, the insulating door draft excluder has a 1 mm groove in the center that can be folded. This makes it easier to open and close the door, reduces friction, and increases its durability.

High-quality Material: The bottom of the insulating door is made of silicone, which is soft and elastic, with high wear resistance and anti-aging. Compared to other door seals, the grooved and hollow structure ensures that our door seal has less friction with the floor and absorbs force evenly without deforming, making it easier and more convenient to use.

Good adhesion: The door seal uses a self-adhesive backing with a 2 cm wide adhesive layer, which can adhere firmly to the bottom of the door and is not easy to peel off. The door seal seals gaps from 0 to 3 cm and is suitable for all types of doors. Please note that the door seal must be slightly above the floor when installed.

Wide application: The door seal can be installed on doors made of various materials, including wooden doors, metal doors, glass doors, etc. Whether it's a sliding door, a bedroom door, or a front door, it can block wind, light, and air circulation and prevent insects from entering your home.

Easy to install: The cold-insulated door draft stopper is very easy to use. Simply clean the door surface, cut the appropriate length based on the door's length, peel off the sticker, and stick it under the door. Make sure it adheres firmly to the door surface. For best results, let it dry for 12 hours. NOTE: For best results, we recommend heating the adhesive with a hair dryer before installation.