200cm Long Silicone Shower Screen, Self-Adhesive Anti-Overflow Strip, Splash Guard, Foldable Shower Screen for Bathroom Floor – Grey

【Tips】 1. After installing the shower screen, it is recommended to apply a uniform bead of silicone sealant around the edges (not included). This improves durability and watertightness. 2. Leave the screen in a vertical position for 30 hours after installation. Ensure that no water seeps through the seal. Wait until the silicone sealant is completely dry before using the screen.

【Multifunctional】 Our shower screen can be fixed to the floor or sink, to the outer edge of the countertop, or in the gap between the countertop and the wall (1 to 10 mm) to prevent dirt from seeping in. This prevents leaks and splashes from the countertop and creates a separation between dry and wet areas. (The shower screen is only 18 mm high, so there is no tripping hazard. It is also easy to move.) 【Versatile Use】 The foldable shower screen is suitable for all smooth surfaces, such as kitchen countertops, sinks, bathroom doors, bathroom corners, bathtub edges, washbasins, window sills, balconies, the space around washing machines, and toilet bases. It forms a watertight barrier, effectively protecting against water and keeping floors and surfaces clean. 【High-Quality Silicone Material】 The shower screen is made of elastic and eco-friendly silicone. Its surface is soft and smooth. Silicone is waterproof, mold-resistant, easy to clean, colorfast, non-deformable, heat and frost resistant, and suitable for all seasons. The shower screen and its mounting system feature an adhesive that ensures a secure hold and prevents detachment. 【Easy Installation】 When installing the shower screen, the floor or work surface must be clean and dry, otherwise the adhesive will not stick properly. Cut the shower screen to the desired length using a knife, remove the protective film from the adhesive strip, stick the shower screen to the desired surface, and then press firmly. (For a curved shower screen, it is recommended to first cut it at a 45-degree angle, then assemble the edges at a 96-degree angle for better stability and greater durability.)