200CM Silicone Shower Barrier, Self-Adhesive Anti-Overflow Shower Threshold Barrier, Shower Water Dam, Shower Threshold Water Dam, Foldable Shower Barrier for Bathroom Floor - Black

【Tips】1. Once the shower gate is installed, it is recommended to evenly coat the edges with silicone sealant (the product does not contain silicone sealant). This will make the shower gate more durable and waterproof. 2. After installation, the shower gate must remain upright for 30 hours. Do not allow water to soak the water-retaining strip; wait for the silicone sealant to harden before using it.

【Multifunctional】Our shower gate can be installed on the sink floor, the outer edge of the countertop, and in the gap between the countertop and the wall to solve the problem of debris entering the gap (1-10mm), water leaks and drips from the countertop, creating a dry/wet separation. (The shower gate is only 18mm high, so it won't cause you to trip or cause problems on the countertop; it's easy to move.)

【Applicable to Multiple Scenarios】Foldable Shower Barrier works well with all smooth floors and work surfaces. Such as kitchen worktops, sinks, bathroom doors, bathroom corners, bathtub edges, washbasins, window sills, balconies, the perimeter of washing machines and the bottom of toilets, forming a spill-proof barrier, effectively waterproofing, keeping floors and countertops clean and tidy.

【High-Quality Silicone Material】This shower threshold is made of environmentally friendly elastic silicone. The surface is soft and smooth, and the silicone material is waterproof and mold-resistant, easy to clean, and resistant to discoloration and deformation. It is also heat-resistant and frost-proof, making it suitable for all seasons. The shower threshold and retention system come with an adhesive backing for strong adhesion, ensuring it won't easily fall off.

【Easy to Install】When installing a shower gate, the floor or countertop must be free of water and dust, otherwise the adhesive will not bond properly. You can use a knife to cut the required length, then peel off the adhesive, stick it to the surface, and finally press it into place. (When you need to make a turn with the shower gate, it is recommended to first cut the smooth strip at a 45-degree angle, then join it at a 96-degree angle, which is more stable and durable.)