200CM Silicone Shower Barrier, Self-Adhesive Anti-Overflow Shower Threshold Barrier, Shower Water Dam, Shower Threshold Water Dam, Foldable Shower Barrier for Bathroom Floor - White

(Tips) 1. Once the shower barrier is installed, it is recommended to evenly coat the edges with silicone sealant (the product does not contain silicone sealant). This will make the shower barrier more durable and waterproof. 2. After installation, the shower barrier must remain in place for 30 hours. Do not allow water to flow through the water-retaining strip. Wait for the silicone sealant to harden before using it. (Multifunctional) Our shower barrier can be installed on the floor or sink, the outer edge of the countertop, and in the gap between the countertop and the wall to solve the problem of debris entering the gap (1-10 mm), prevent water leaks and drips from the countertop, and create a dry and wet separation. (The shower barrier is only 18 mm high, so it won't cause tripping or problems on the countertop, and it's easy to move.) (Applicable to Multiple Scenarios) The foldable shower barrier works well on all smooth floors and countertops, such as kitchen countertops, sinks, bathroom doors, bathroom corners, bathtub edges, washbasins, window sills, balconies, the perimeter of washing machines, and the bottom of toilets, forming a spill-proof barrier, effectively waterproofing, and keeping floors and countertops clean and tidy. (High-Quality Silicone Material) The shower threshold is made of environmentally friendly, elastic silicone. The surface is soft and smooth, and the silicone material is waterproof, mold-resistant, easy to clean, and resistant to discoloration and deformation. It is also heat and frost resistant, making it suitable for all seasons. The shower threshold and retention system come with an adhesive backing for strong adhesion, preventing it from easily falling off. (Easy to Install) When installing the shower barrier, the floor or countertop must be free of water and dust, otherwise the adhesive will be weak. You can use a knife to cut the required length, then peel off the adhesive, stick it to the surface, and finally press it into place. (When you need to create a curve in the shower barrier, it is recommended to first cut the smooth edge at a 45-degree angle, then join it at a 96-degree angle for greater stability and durability.)