2026 PowerScan PS100 Automotive Circuit Tester, Electrical Circuit Testing Tool, Short Circuit Detector for 12-24V Circuit Breakers, AC/DC Current Resistance & 6M Extension Cord for 99% of Vehicles

📢📢ATTENTION: The Power Probe PS100 has NO IP restrictions, but it ONLY has an ENGLISH MENU. Other languages are NOT AVAILABLE. Please be careful when purchasing. Please note the correct polarity connection when using the device: Positive to Positive; Negative to Negative. If it is reversed, the PS100 may malfunction. For any technical assistance or after-sales service, please feel free to contact us at: 💌direct@outlook.com💌
🥇【All-in-One Power Circuit Probe Tester 2026】The PS100 Power Circuit Tester aims to reduce circuit diagnostic time in all vehicle electrical systems from 6 to 30 volts, making it the best electrical tester for automotive technicians. This automotive power supply circuit probe supports voltage and polarity testing, continuity testing, signal circuit testing, component activation, bad ground contact verification, and short circuit location. For any questions, please contact us at: 💌direct@outlook.com💌
🥇【Four Operating Modes】 The PS100 supports four operating modes: DC Voltage, AC Voltage, Resistance, and Tone On/Off. DC Voltage mode can read with 0.1 volt resolution. AC Voltage mode reads maximum voltage, minimum voltage, frequency, and duty cycle. Resistance mode reads resistance between the probe tip and the auxiliary ground wire. The Tone On/Off function is a very stylish design; you can quickly press the mode button to change the tone and enable/disable the audible beep. For any questions, please contact us at: 💌direct@outlook.com💌
🥇【Component Activation】The Component Activation function is specifically designed for troubleshooting onboard/outboard electrical equipment. By generating activation signals for components, you can determine if components are in good working order, such as lights, motors, windshield wipers, radiator fans, relays, and fuel injectors, etc. The PS100 circuit tester automotive tool can activate the component in your hand / in the vehicle / with ground, etc.
🥇【Quickly Identify Polarity】The PS100 instantly checks component continuity and identifies positive, negative, and open circuits. When the positive terminal is connected, the red LED illuminates, accompanied by a beep. When the negative terminal is connected, the green LED illuminates, accompanied by a low tone. If there is an open circuit, the LED light will not turn on. For any questions, please contact us at: 💌direct@outlook.com💌